INCREASING WEAR RESISTANCE OF MACHINES DETAILS FROM CARBON AND Cr – Mn – N STEELS OF THE COMPLEX BORIDE COATINGS

  • 1 National Technical University of Ukraine "Kiev Polytechnic Institute", Ukraine, Kiev
  • 2 The Frantsevich Institute for Problems of Materials Science of NAS of Ukraine, Ukraine, Kiev

Abstract

The results of studies wear resistance of boron coatings alloyed with Сu, V, Nb, Cr or Ti under dry friction – slip in the air, and it was determined that the best coatings are the boride layers alloyed with copper. Alloying with copper inereases wear resistance of boride layers in 3 times. When alloying of boride layers with niobium wear resistance increases in 2,8 times, with titanium – in 2,4 times, with chromium and vanadium – in 1,5 times. Wear resistance of boride coatings alloyed with copper under dry friction – slip 14 times higher than wear resistance of bronze of Cu – Al – Mn system and wear resistance increases when applying boride layers alloyed with copper.

Keywords

Article full text

Download PDF