International Scientific Journals
of Scientific Technical Union of Mechanical Engineering "Industry 4.0"

  • Journals
  • Submission
  • Events
  • About us
  • Contact

Author: Bankova A.

  • IMPLEMENTATION OF AN AUTOMATED DOCUMENTED IN TEACHING TECHNICAL DOCUMENTATION

    • Bankova A.
    • Zhechva G.
    Machines. Technologies. Materials., Vol. 9 (2015), Issue 2, pg(s) 34-36
    • Abstract
    • View Article
    •  Article PDF

    This report examined the means of automated design and analysis of technical documentation in CAD environment. Based on the analysis is to develop a methodology for course work in the discipline technical documentation using CAD systems for students of all engineering disciplines. The introduction of CAD products CAD early in training will enhance student motivation for their use – further in the education process in diploma projects.

  • APPLICATION OF CAD / CAM SYSTEM FOR FINDING INTERSECTION OF GEOMETRIC OBJECTS IN THE LEARNING PROCESS

    • Bankova A.
    Innovations, Vol. 3 (2015), Issue 1, pg(s) 42-44
    • Abstract
    • View Article
    •  Article PDF

    This work is predstaveno decision of task of finding the intersection of geometric objects with the use of CAD / CAM systems in particular graphical programming environment Autocad .. The problem is solved by the method of auxiliary secant planes. Based on the studies and analyzes on resolving this type of geometric tasks is summarized methodology for finding the intersection between the two geometric objects. The process of the graphic finding the intersection by using the CAD / CAM system is illustrated step by step on the basis of the methodology.

  • TECHNOLOGICAL BASIS OF “INDUSTRY 4.0”

    METHODOLOGY FOR CONSTRUCTION OF PERSPECTIVE IMAGE OF AN OBJECT THREE DIMENSIONS

    • Bankova A.
    • Zhecheva G.
    Industry 4.0, Vol. 1 (2016), Issue 2, pg(s) 89-92
    • Abstract
    • View Article
    •  Article PDF

    This work has been viewed and analyzed architectural perspective as the most commonly used in the construction of perspective images of architectural objects. The following are the basic principles of getting perspective image and elements of prospective construction. Based on methods for building a promising images of points, lines and rectangles lying on the field was built prospect of threedimensional body – prism. There are two variants in building perspective image: prism – the edge of which falls within the projection plane and perspective image of the prism away from the projection plane.

Congresses and conferences

  • VII International Scientific Conference
    "High Technologies. Business. Society"
    07.-10.03.2022 - Borovets, Bulgaria
  • XV International Conference for Young Researchers
    "Technical Sciences. Industrial Management"
    09.-12.03.2022 - Borovets, Bulgaria
  • XIX International Congress
    "Machinеs. Technolоgies. Materials"
    winter session
    09.-12.03.2022 - Borovets, Bulgaria
  • XXVIII International Scientific Technical Conference
    "Foundry"
    06.-08.04.2022 - Pleven, Bulgaria
  • X International Scientific Conference
    "Engineering. Technologies. Education. Safety"
    06.-09.06.2022 - Borovets, Bulgaria
  • XXX International Scientific Conference
    "trans&MOTAUTO"
    20.-23.06.2022 - Burgas, Bulgaria
  • VIII International Scientific Congress
    "Innovations"
    20.-23.06.2022 - Varna, Bulgaria
  • X International Scientific Congress
    "Agricultural Machinery"
    21.-25.06.2022 - Burgas, Bulgaria
  • VII International Scientific Conference
    "Industry 4.0"
    summer session
    22.-25.06.2022 - Varna, Bulgaria
  • VII International Scientific Conference
    "Conserving Soils and Water"
    24.-27.08.2022 - Borovets, Bulgaria
  • VIII International Scientific Conference
    "Materials Science. Non-Equilibrium Phase Transformations"
    05.-08.09.2022 - Varna, Bulgaria
  • XVII International Congress
    "Machines. Technologies. Materials"
    summer session
    07.-10.09.2022 - Varna, Bulgaria
  • VI International Scientific Conference on Security
    "Confsec"
    05.-08.12.2022 - Borovets, Bulgaria
  • VII International Scientific Conference
    "Industry 4.0"
    winter session
    07.-10.12.2022 - Borovets, Bulgaria
  • VI International Scientific Conference
    "Mathematical Modeling"
    07.-10.12.2022 - Borovets, Bulgaria

Scientific Technical Union of Mechanical Engineering "Industry-4.0"

108, Rakovski Str., 1000 Sofia, Bulgaria
tel. (+359 2) 987 72 90, tel./fax (+359 2) 986 22 40,
office@stumejournals.com