Effect of low-frequency vibration on the structure and residual stresses in SLM Ti-6Al-4V alloy
The effect of the low-frequency vibration processing on the residual elastic stresses in the Ti-6Al-4V alloy manufactured by 3D printing (Selective laser melting) was investigated. The studied sample was manufactured horizontally in respect to the building platform. Different vibration oscillations modes (vertical, horizontal, and elliptical) were chosen for study. The oscillations were done with frequency of 16 Hz, and a processing time was 20 minutes. Studies shown that 3D printed sample had a high level of residual elastic stresses, which were changed after vibration treatment. The optimal parameters of vibration processing, which provide a minimum level of residual elastic stresses in 3D printed Ti-6Al-4V alloy are discussed.