TECHNOLOGIES
Trends of online google searches related to welding process
In this paper is reviewed google search as a helpful free instrument for statistics when preparing the state of art. It is applied to welding processes.
In this paper is reviewed google search as a helpful free instrument for statistics when preparing the state of art. It is applied to welding processes.
It is presented comparison between captured and simulated temperatures in specific points of welding process and simulation model made with MAGMA software.
It is presented set up for real time capturing welding parameters – voltage, current and temperature in specific points of welding process.
It is presented experiment for temperature measurement in welding process. It is shown arc interference with measurements and temperature versus distance form arc trajectory. This study will help selecting specific points for measuring temperature in welding process..
It is presented real time capturing voltage and current in welding process with module Lincoln Arc Tracker
It is presented real time capturing temperature in specific points of welding process with pyrometer
In this paper we have exposed 3 HD cameras with CMOS sensor in long time experiment at different doses and exposition time with γ radiation from 2 sources of ionizing radiation – cobalt 60 (Co60) and cesium 137 (Cs137) at room temperature imitating the working conditions of “hot cell” premises. All components of the used camera are without radiation reinforcement, excluding the lenses. During the experiment, we found degradation of the irradiated cameras. As the absorbed dose increases, the image becomes brighter. Furthermore, experimental results demonstrated decreasing in signal-noise ratio (SNR) with increasing the absorbed dose. We confirmed that the HD
industrial cameras can operate in ionizing radiation environment with moderate decrease of
It is created computer model of wire extrusion process with Matlab. The model is verified by comparing the simulated results with experimental.