International Scientific Journals
of Scientific Technical Union of Mechanical Engineering "Industry 4.0"

  • Journals
  • Submission
  • Events
  • About us
  • Contact

Author: Jovanovska D.

  • Norms and legal regulations to limit toxic emissions from internal combustion engines when using alternative fuels as environmentally eligible in relation of conventional fuels

    • Veljanovski D.
    • Jovanovska V.
    • Jovanovska D.
    • Sovreski Z.V.
    Trans Motauto World, Vol. 4 (2019), Issue 2, pg(s) 78-82
    • Abstract
    • View Article
    •  Article PDF

    During the decades-long development of internal combustion engines, the main criteria for optimality were the increased power, the low fuel consumption and the adjustment of the working process under non-stationary operating conditions. Even when the air quality in some settlements was significantly worsening, due to the high degree of motorization, special attention has been paid to polluting the atmosphere with exhaust gases from the engines. Problems that are created due to the increased environmental pollution significantly influence the choice of providing minimal environmental conditions, they receive priority, especially in urban areas. As toxic components are considered CO, CnNm, NOx, solid particles, etc. So if we know the conditions in which they are created then they can be the criterion for optimality. The requirements also affect their reduction within certain permitted limits.

  • Theory of factor experiment (matrix of impact) of greenhouse as a composition system for biogas production and regulation for permissible emissions of harmful materials in atmosphere

    • Veljanovski D.
    • Jovanovska V.
    • Jovanovska D.
    • Hristovska E.
    Science. Business. Society., Vol. 4 (2019), Issue 4, pg(s) 124-126
    • Abstract
    • View Article
    •  Article PDF

    By applying a complex, exact and scientific approach, was performed the development, calculation and analysis of a complex pilot installation (bioenergetics system consisting of the following elements: greenhouse for early vegetation crops, digester and internal combustion engine powered by biogas). Using the factorial experiment, i.e. applying the matrix of influence, a complete optimization of the internal combustion engine was performed in function of the other elements of the installation. An analysis is also made from the aspect of the positive current EU regulations in the field of air pollution.

Congresses and conferences

  • VII International Scientific Conference
    "High Technologies. Business. Society"
    07.-10.03.2022 - Borovets, Bulgaria
  • XV International Conference for Young Researchers
    "Technical Sciences. Industrial Management"
    09.-12.03.2022 - Borovets, Bulgaria
  • XIX International Congress
    "Machinеs. Technolоgies. Materials"
    winter session
    09.-12.03.2022 - Borovets, Bulgaria
  • XXVIII International Scientific Technical Conference
    "Foundry"
    06.-08.04.2022 - Pleven, Bulgaria
  • X International Scientific Conference
    "Engineering. Technologies. Education. Safety"
    06.-09.06.2022 - Borovets, Bulgaria
  • XXX International Scientific Conference
    "trans&MOTAUTO"
    20.-23.06.2022 - Burgas, Bulgaria
  • VIII International Scientific Congress
    "Innovations"
    20.-23.06.2022 - Varna, Bulgaria
  • X International Scientific Congress
    "Agricultural Machinery"
    21.-25.06.2022 - Burgas, Bulgaria
  • VII International Scientific Conference
    "Industry 4.0"
    summer session
    22.-25.06.2022 - Varna, Bulgaria
  • VII International Scientific Conference
    "Conserving Soils and Water"
    24.-27.08.2022 - Borovets, Bulgaria
  • VIII International Scientific Conference
    "Materials Science. Non-Equilibrium Phase Transformations"
    05.-08.09.2022 - Varna, Bulgaria
  • XVII International Congress
    "Machines. Technologies. Materials"
    summer session
    07.-10.09.2022 - Varna, Bulgaria
  • VI International Scientific Conference on Security
    "Confsec"
    05.-08.12.2022 - Borovets, Bulgaria
  • VII International Scientific Conference
    "Industry 4.0"
    winter session
    07.-10.12.2022 - Borovets, Bulgaria
  • VI International Scientific Conference
    "Mathematical Modeling"
    07.-10.12.2022 - Borovets, Bulgaria

Scientific Technical Union of Mechanical Engineering "Industry-4.0"

108, Rakovski Str., 1000 Sofia, Bulgaria
tel. (+359 2) 987 72 90, tel./fax (+359 2) 986 22 40,
office@stumejournals.com