Security & Future
Vol. 10 (2026), Issue 1, pg(s) 37-40

TECHNICAL FACILITIES FOR ENSURING SECURITY

Features in the design of unmanned aerial vehicles aircraft type

  • 1 Higher Air Force School „G. Benkovski“ - Dolna Mitropolia, Bulgaria,

Abstract

The use of aircraft-type unmanned aerial vehicles (UAVaircraft type) in modern combat operations is considered. Basic temporary criteria for the production and operation of aircraft-type UAVs are defined. Using the similarity method, a determination of the mass of aircraft-type UAVs is proposed. A variant is proposed related to the calculation of the mass of the fuselage of certain aircraft-type UAV models. The difference in the use of retractable or fixed landing gear of aircraft-type UAV types in their operation is determined. Recommendations are made for noise reduction during UAV operation. The economic aspects of aircraft-type UAV design are touched upon.

Keywords

References

  1. Badagin A, Muhamedov F.A. Konstruktion von Leichtflugzeugen M. Maschinenbau, 1978-2028 S..
  2. Ivanov M. V. E-mail: str412mam@mail.ru, Moscow State Technical University named after N. E. 2005.
  3. Krasilshchikova M.N., Sebryakova G.G., Management and guidance of unmanned maneuverable aerial vehicles based on modern information technologies, Fizmatlit, 2003.
  4. Mineva S.K., Research and increasing the effectiveness of the financial management of modern organizations, V. Levski National University, V. Tarnovo, (2025).
  5. Moiseev V.S., Saleev A.B. Main directions of development of unmanned aviation complexes on the basis of piloted prototypes of aviation technology developed for the state, Aerospace technologies and equipment (AKTO-2006). Materials of the international scientific and technical conference. - Kazan: Kazan Publishing House. Mr. technical University, 2006. - P. 60-62.
  6. Fundamentals of design, construction and manufacturing of aircraft (remotely piloted aircraft). In order. I.S. Golubeva and Yu.I. Yanke-vicha. - Moscow: MAI Publishing House, 2006. - 528 p.
  7. Kanchev, N., Аpplication of fused deposition modeling approach for 3d printing in the design and manufacturing of small unmanned aerial vehicles.aeronautical research and development, Volume 3, 2024 "Georgi Benkovski" Bulgarian Air Force Academy, стр. 85-96, p-ISSN 2815-293X, e-ISSN 2815-2948
  8. Stratton R.A., Corlson N.L. Fiber wall damage during bond failure, Nordic Pulp Paper Res. J. 1993. N2. Pp. 245–249.
  9. https://ru.ruwiki.ru/wiki/?utm_referrer=https://yandex.ru/ 15.04.2026
  10. https://yandex.ru/search/?18=.05.2026

Article full text

Download PDF