Industry 4.0
Vol. 7 (2022), Issue 2, pg(s) 59-61

DOMINANT TECHNOLOGIES IN “INDUSTRY 4.0”

New concepts of severe plastic deformation combined processes

  • 1 Karaganda Industrial University, Temirtau, Kazakhstan;
  • 2 Rudny industrial Institute, Rudny, Kazakhstan
  • 3 Ural Federal University named after the First President of Russia B.N. Yeltsin, Ekaterinburg, Russia

Abstract

On the basis of review of last developed combined metal forming processes the new concepts of severe plastic deformation combined processes aimed at further improving the deformation performance are proposed. The presence in all three proposed variants of the ECAP scheme will allow deforming without significantly changing the initial dimensions of the workpiece.

Keywords

References

  1. R.Z. Valiev, T.G. Langdon. Principles of equal-channel angular pressing as a processing tool for grain refinement. Progress in Materials Science. 2006. Vol. 51. pp. 881–981.
  2. Jaeger A., Gaertnerova V. Equal channel angular pressing of magnesium at room temperature: the effect of processing route on microstructure and texture. Philosophical Magazine Letters. 2012, Vol. 92, Iss. 8, pp. 384-390.
  3. EA рatent 1861211. Severe plastic deformation of metals. Rosochowski Andrzej, 2007
  4. A. Naizabekov, S. Lezhnev, E. Panin, I. Volokitina, A. Arbuz, T. Koinov, I. Mazur. Effect of Combined Rolling–ECAP on Ultrafine-Grained Structure and Properties in 6063 Al Alloy. Journal of Materials Engineering and Performance. 2019, Volume 28, Issue 1, pp 200–210.
  5. A. Naizabekov, S. Lezhnev, A. Arbuz, E. Panin. Combined process “helical rolling-pressing” and its effect on the microstructure of ferrous and non-ferrous materials. Metallurgical Research & Technology. Volume 115, Number 2, 2018, Article Number: 213.
  6. A. Naizabekov, I. Volokitina, A. Volokitin, E. Panin. Structure and Mechanical Properties of Steel in the Process “Pressing–Drawing”. Journal of Materials Engineering and Performance. 2019, Volume 28, Issue 3, pp 1762–1771.
  7. С.Б. Сидельников, Н.Н. Довженко, Н.Н. Загиров. Комбинированные и сов-мещенные методы обработки цветных металлов и сплавов: монография. - М.: МАКС Пресс, 2005.- 344 с.
  8. Lopatina E.S., Biront V.S., Sidelnikov S.B. Metallographic tests of modifying ability of rods from aluminum alloys obtained by combined casting and rolling-extruding. Journal of Siberian Federal University. Engineering and Technologies. 2014. Vol. 7. Iss. 2. pp. 127-131.

Article full text

Download PDF