Industry 4.0
Vol. 9 (2024), Issue 6, pg(s) 215-219

DOMINANT TECHNOLOGIES IN “INDUSTRY 4.0”

Statistical processing of set up error occurred during turning in self-centering three-jaw chuck and between centers on CNC machines

  • 1 Technical University Sofia, Bulgaria,branch Plovdiv

Abstract

In this article, the objects of research are 40 pieces sleeves made from aluminum alloy 6080 and results were obtained from the measurement of the observed sign of inner cylindrical surface runout relative to the external one. The graphical visualizations of the analyzed data were made. A comparison is made between the amount of error obtained by two setting methods on a CNC lathe- in a universal self-centering chuck and between centers.

Keywords

References

  1. Kiseleva, A & Barbashov, Nikolai. (2022). Making amendments to CNC machines in order to improve manufacturing accuracy. Journal of Physics: Conference Series. 2388. 012110. 10.1088/1742-6596/2388/1/012110
  2. Suslov, Anatoliy & Petreshin, Dmitriy & Shalygin, Mikhail & Khandozhko, Viktor. (2024). Automated technological support and improvement of the operational properties of machine parts. Science intensive technologies in mechanical engineering. 24-33. 10.30987/2223-4608- 2024-24-33.
  3. Tayier, Walisijiang. (2024). ENHANCING CNC PRECISION: A REVIEW OF GEOMETRIC ERRORS AND SIMULATION METHODS IN THREE-AXIS CNC SYSTEMS. Journal of Engineering & Technological Advances. 9. 55-74. 10.35934/segi.v9i1.108.
  4. Shin, Yoon & Ryu, Choong-Mo & Hwang, Jong & Moon, Seung. (2024). Comparison of experiments and simulation data through the installation of an internal heating tube in a bushing. 10.21203/rs.3.rs-4574452/v1.
  5. Rojas Gregorio, Jose & Contel, Alejandro & Crespo, Daniel. (2024). Effect of temperature and frequency on the viscoelastic behavior of commercial 6082 (Al–Mg–Si) alloy. SAE International Journal of Materials and Manufacturing. 17. 2024. 10.4271/05-17-04-0028.
  6. Zhang, Lina & Calderon, Aldrin. (2024). Research and prospects of CNC lathe. Cogent Engineering. 11. 10.1080/23311916.2023.2299043.
  7. Sana, Mehroz & Saleem, Umer & Farooq, Muhammad & Qamar, Adnan & Bhutta, Muhammad & Zafar, S.. (2018). Identification of failure modes on electrostatic chuck through reliability centered maintenance: A case study..
  8. Shoukat, Muhammad Haroon. (2024). Sampling Techniques in Research Methods. 10.13140/RG.2.2.18885.26080
  9. Ganesan, Kalaimagal & M. S., Vasanthi. (2024). Analysis of Wideband spectrum sensing using Anderson darling test statistics in underlay cognitive microcell. Journal of Electrical Systems. 20. 1777-1789. 10.52783/jes.2513.
  10. Jäntschi, Lorentz & Bolboaca, Sorana. (2018). Computation of Probability Associated with Anderson– Darling Statistic. Mathematics. 6. 88. 10.3390/math6060088.
  11. .Askerden, Mehmet & Yazar, Mustafa & Talaş, Şükrü. (2024). Effects of CNC Tool Runouts on Drilling Process. Engineering Perspective. 119-124. 10.29228/eng.pers.77964.

Article full text

Download PDF