Innovations
Vol. 8 (2020), Issue 1, pg(s) 33-36

INNOVATIVE SOLUTIONS

Evenness and unevenness in cylindrical milling

  • 1 Faculty of Manufacturing Engineering and Technologies, Department of Technology of Machine tools and Manufacturing, Technical University of Varna, Varna, Bulgaria

Abstract

High-speed milling is one of the new modern technologies in machining. It is radically different from the known method of the conventional milling in fundamentally different process specified by the modified mechanism of the cutting process. This article presents a theoretical model to determine the coefficient of unevenness aimed at giving information whether already selected cutting conditions in cylindrical milling is admissible. This makes it possible to use the power of the machine most conveniently, to improve the quality of the machining and to achieve a relaxed operation. The model is based on derived mathematical equations

Keywords

References

  1. Simeonov N. G., Lefterov E. L., Efficiency and applicability of high-speed milling, Journal of Mechanical Engineering and Technology, Printed Base of TU-Varna, vol.1, 2014, Varna, pp.69-75 (in Bulgarian)
  2. Simeonov N.G., Lefterov E. L., Material and geometry of cutting tools for high-speed milling, Journal of Mechanical Engineering and Technology, Printed Base of TU-Varna, vol.1, 2014, Varna, pp.64-69 (in Bulgarian)
  3. Lefterov E., Optimal methods and means for machining, University of Ruse „Angel Kanchev“, Ruse, 2013, pp.160 (in Bulgarian)
  4. Lefterov E., Avramova T. Milling of Complex Surfaces, Fiability and Durability, Editura “Academica Brancusi”, Targu-Jui, vol.1, 2018, pp.167-172
  5. Lefterov E., Cutting tools, Lazarov Design LtD, Varna; 2017, pp.486 (in Bulgarian)
  6. G.Stepan, Munoa, T.Insperger, M.Surico, D.Bachrathy, Z.Dombovaria. Cylindrical milling tools: Comparative real case study for process stability, CIRP Annals, Elsevier, vol.63, issue 1, 2014, pp.385-388
  7. Károly Nehéz, Tibor Csáki. Cutting force modeling possibilities in opengl based milling simulators, Production Systems and Information Engineering, vol.1, Miskolc, 2003, pp.29-39
  8. Engin, S., Altintas, Y. Mechanics and Dynamics of General Milling Cutters. Part I: Helical End Mills, Int. J. Mach. Tools Manufacture, vol.41, 2001, pp.2195-2212

Article full text

Download PDF