Innovations
Vol. 10 (2022), Issue 2, pg(s) 64-70

INNOVATION POLICY AND INNOVATION MANAGEMENT

Financial project for construction of a plant for the production of granules, panels and plates of foam glass and small and large composite elements

  • 1 Bulgarian Academy of Sciences, Institute of Metal Science, Equipment and Technologies with Hydro and Aerodynamics Centre “Acad. A. Balevski”, Sofia, Bulgaria

Abstract

A financial project has been prepared for the construction of a plant equipped with a technological line for the production of foam glass products. It is planned to build a warehouse for raw materials, a sector for preparation of materials, various production workshops for the manufacturing of foamed granules and pieces, a continuous tape or block of foam glass, various composite materials (thermal insulation and color decorative panels, various small and large composite elements, etc.), repair section and two warehouses for finished products. Approximate calculations have been made for the necessary raw materials, technical equipment, electricity, personnel and other costs for the realization and operation of the plant.

Keywords

References

  1. D. A. Keen, R. L. McGreevy, “Structural modelling of glasses using reverse Monte Carlo simulation”, Nature, vol. 344, 1990, pp. 423–425.
  2. S. Simon, D. Eniu, “Spectroscopic characterisation of local structure in Y2O 3-B2O3-Bi2O3 glasses doped with gadolinium”, Journal of Materials Science, 42(15), 2007, pp. 5949-5953.
  3. L. O. Hedges, R. L. Jack, J. P. Garrahan, David Chandler, “Dynamic Order-Disorder in Atomistic Models of Structural Glass Formers”, Science, vol. 323, Issue 5919, 2009, pp. 1309-1313.
  4. S. Bala Murali Krishna, A. Ramesh Babu, Rajya Sree. Ch, D. Krishna Rao, “Influence of molybdenum ions on the structure of ZnO-As2O 3-Sb2O3 glass system by means of spectroscopic and dielectric studies”, Journal of Non-Crystalline Solids, 356 (35-36), 2010, pp. 1754-1761.
  5. I. M. Kalogeras, H. E. Hagg Lobland, “The nature of the glassy state: Structure and glass transitions”, Journal of Materials Education, vol. 34/3-4, 2012, pp. 69-94.
  6. M. Veleva, D. Bozskov, K. Toncheva, “Industrial perspectives of the bulgarian metod for foamglass production”, 12-th Conference on Glass and ceramics, Publishing House “Science Invest”, Sofia, 1997, pp. 119-123.
  7. K. Toncheva, L. Lakov, “Technologies and constructions for the production of foam glass”, Scientific Conference, October 29-30, 2010, Ruse, Scientific Papers of the University of Ruse, Volume 49, Series 1.2, pp. 25-33.
  8. K. Toncheva, “Creation and research of a blowing section of a system for obtaining a continuous strip of foam glass“, PhD thesis for the award of the educational and scientific degree "Doctor", Specialty - “Technologies, machines and systems of foundry production”, Code 02.01.18, Sofia, 2014, p. 168.
  9. G. Mutafchieva, “Technological development of lighting fixtures in the field of silicate design”, Collection reports, Design & applied arts - Sofia, NAA, 2018, pp. 138-144.
  10. G. Mutafchieva. “Мodern trends and development of lighting fixtures in the field of silicate design”, PhD thesis for the award of the educational and scientific degree "Doctor", NAA, Bibliography 87, 2020, p. 215.
  11. V. Petkov, M. Aleksandrova, R. Valov, “Partial oxidation of biocompatible titanium alloy Ti6Al4V during deposition of glassy carbon coating”, International Journal “NDT Days”, Vol. III, Issue 4, Year 2020, pp. 225-230.
  12. V. Petkov, M. Aleksandrova, V. Blaskov, “Deposition of ZrO2 thin films obtained by sol-gel method on monolithic composite with layered structure of Nb30Ti/Al”, International Scientific Journal "MACHINES. TECHNOLOGIES. MATERIALS", Year XVI, Issue 2/2022, pp. 58-61.
  13. Y. Dimitriev, A. Bachvarova-Nedelcheva, R. Iordanova, S. Yordanov, “Thermal Stability and Microheterogeneous Structure of Selenite Glasses”, Physics and Chemistry of Glasses: European Journal of Glass Science and Technology Part B 48(3), 2007, pp. 138-141.
  14. A. Bachvarova-Nedelcheva, R. Iordanova, K. L. Kostov, V. Ganev, St. Yordanov, Y. Dimitriev, “Synthesis and Structural Characterization of a Glass in the Ag2O-SeO2-MoO3 System”, Journal of Non-Crystalline Solids 481, 2018, pp. 138-147.
  15. K. Toncheva, "Organizing the production of foam glass", Newspaper "Arch - Art", Issue 2, 16.01.1996, p. 2.
  16. P. Mukhtarov, R. Bojilova, “Influence of solar and geomagnetic activity on the ionosphere over Bulgaria”, Comptes rendus de l’Acad´emie bulgare des Sciences, 70, 9, Publishing House of BAS "Prof. Marin Drinov", 2017, pp. 1289-1296.
  17. R. Bojilova, P. Mukhtarov, “Relationship between the critical frequencies of the ionosphere over Bulgaria and geomagnetic activity”, Comptes rendus de l’Acad´emie bulgare des Sciences, 73, 8, Publishing House of BAS "Prof. Marin Drinov", 2020, pp. 1113- 1122.
  18. I. G. Chorbov, K. A. Toncheva, L. I. Lakov, Y. B. Arsov, “Device for obtaining foam glass”, Patent № 65718 / 24.11.2004, Status - Valid, Place of application Bulgaria.
  19. I. G. Chorbov, K. A. Toncheva, L. I. Lakov, Y. B. Arsov, L. N. Dosev, K. M. Lichev, “Device for obtaining foam glass”, Patent №65745 /26.05.2006, Status - Valid, Place of application Bulgaria.

Article full text

Download PDF