International Scientific Journals
of Scientific Technical Union of Mechanical Engineering "Industry 4.0"

This paper present analysis of energy flow streams through the main steam turbine (the turbine is used for commercial LNG carrier propulsion) at three different loads. An increase in the propulsion plant (and proportionally increase in the main turbine) load resulted with an increase in energy flow streams and with an increase in the amount of water droplets inside steam at the main turbine outlet. Analyzed turbine has three steam extractions which opening as well as the amount of energy flow stream delivered through each extraction, significantly differs at various loads. The analysis shows that the highest energy flow stream consumers from the main turbine are deaerator and high pressure feed water heating system.

The paper presents an exergy analysis of steam condenser at three different loads and in the ambient temperature range between 5 °C and 20 °C. An increase in the condenser load and increase in the ambient temperature resulted with an increase in steam condenser exergy destruction (exergy power losses). At low load, condenser exergy destruction is for the order of magnitude lower if compared to middle and high condenser loads. Decrease of the condenser load and decrease of the ambient temperature resulted with an increase in condenser exergy efficiency. The highest steam condenser exergy efficiencies are obtained at the lowest observed ambient temperature of 5 °C and amounts 81.47 % at low condenser load, 76.10 % at middle condenser load and 74.54 % at high condenser load. From the exergy viewpoint, the optimal condenser operating regime is low load and the lowest possible ambient temperature.