Machines. Technologies. Materials.
Vol. 12 (2018), Issue 11, pg(s) 462-645

Peculiarities of stress-strain state of toroidal pressure hull, made by spiral winding

  • 1 Institute of Pulse Processes and Technologies of NAS of Ukraine – Mykolaiv, Ukraine
  • 2 Admiral Makarov National University of Shipbuilding – Mykolaiv, Ukraine

Abstract

Peculiarities of stress-strain state of pressure hull of underwater technical device, shaped as torus with circle intersection, which was obtained by spiral winding of polymer composite materials, are presented.

Keywords

References

  1. Kompozitsionnyie materialyi: Handbook. ed. by Vasileva V., Tarnopolskiy Yu. Moscow, Mashinostroenie, 1990, 512 p. (Vasileva V., Tarnopolskiy Yu), (In Russian).
  2. Sizonenko O., Burdun E., Prystash S. Peculiarities of stress-strain state of toroidal pressure hull, made by winding. International journal for science, technics and innovations for the industry. Machines, Technologies, Materials, Year ХII Issue 6/2018. – P. 240-243
  3. Bolotin V. Mehanika mnogosloynyih konstruktsiy. Moscow, Mashinostroenie, 1980, 375 s. (Bolotin V., Novichkov Yu.), (In Russian).
  4. Komkov M. Opredelenie konstruktivnotehnologicheskih parametrov obolochek, namotannyih iz kompozitsionnyih materialov: Tutorial. Ed. by Komkov M., Moscow, BMSTU, 1992, 83 p.(Komkov M., Bulanov I), (In Russian).
  5. Burdun E. Ratsionalnoe proektirovanie kompozitnogo prochnogo korpusa toroidalnoy formyi dlya tehnicheskih sredstv osvoeniya okeana. - Vestnik of Astrakhan State Technical University. Series: Marine engineering and technologies, 2014, Vol 2, P 27-36. (Burdun E., Kreptyuk A.), (In Russian).

Article full text

Download PDF