Machines. Technologies. Materials.
Vol. 12 (2018), Issue 12, pg(s) 491-493

Examining the possibility of marking and engraving of textiel using CO2 laser

  • 1 Land Forces Faculty, Veliko Tarnovo – „Vasil Levski” National Military University, Veliko Tarnovo, Bulgaria
  • 2 National Research University "Moscow Power Engineering Institute", Moscow, Russia

Abstract

The possibility of marking and engraving on cloth with CO2 laser has been studied. For this purpose a methodology of experiments was developed in which a matrix of nine squares measuring 1: 1 cm and a laser beam velocity and power of 2-26 W and 100-350 mm / s, respectively.

Keywords

References

  1. Adelina Han, Dinu Gubencu, Analysis of The Laser Marking Technologies, Nonconventional Technologies Review – no.4/ 2008.
  2. Angelova Y., Lazov L., Mezinska S., Rezene, Latvia, Innovative Laser Technology in Textile Industry: Marking and Engraving, Technical University of Gabrovo, Bulgaria, Rezekne Academy of Technologies, Faculty of Engineering, Rezekne, Latvia Proceedings of the 11th International Scientific and Practical Conference. Volume III, 15-21.
  3. Drago N., Villoresi P., Graziano Bertogli, Laser technologies: a step forward for small and medium Enterprises, International Centre for Science and High Technology, Trieste, http://capacitydevelopment.unido.org/wpcontent/uploads/2014/11/10.-Laser-technologies-a-stepforward-for-small-and-medium-enterprises.pdf, 2008.
  4. Hecht J., Short history of laser development, Massachusetts, Optical Engineering 2010, Vol. 49.
  5. Lazov L.., Angelov N., The 50th anniversary of laser, Technical University of Gabrovo, Bulgaria, 2010.
  6. Payne J., Cutting Through the Surface: The Use of Laser Cutting Technology with Traditional Textile Process, University of Nebraska – Lincoln, Textile Society of America Symposium Proceedings, 2010.
  7. Sobotova L., Demeclaser P., Marking of Metal Materials, Science Journal, December 2015.
  8. Лазов Л., Ангелов Н, Изследване на контраста във функция от скоростта при лазерно маркиране на образци от стомана, International Scientific Conference, GABROVO, 2010.
  9. Петров Н., Оптимизация на процеса маркиране с лазерно лъчение на образци от инструментална стомана, дисертация, Габрово, 2011.
  10. https://rdworks.software.informer.com
  11. https://developer.paciellogroup.com/resources/contrastanalyser
  12. Lilov I., Leonov D. Methodologyfor optimizing the influence of surface roughness on the functional properties of details in mechanical engineering, International Scientific Journal Machines.Technologies. Materials” Print ISSN 1313-0226; Online ISSN 1314-507X; https://stumejournals.com/journals/mtm/2015/5/46/pdf.

Article full text

Download PDF