Machines. Technologies. Materials.
Vol. 15 (2021), Issue 4, pg(s) 135-139

MACHINES

Development of mechanism and machine mechanics in Belarus and interaction with Bulgarian scientific and engineering centers and associations part 2. Input of Belarusian scientists in mechanism and machine mechanics and interaction with Bulgarian scientific centers and BAPT

  • 1 V.A. Belyi Metal-Polymer Research Institute of NASB, Gomel, Belarus
  • 2 Joint Institute of Mechanical Engineering of NASB –Minsk, Belarus
  • 3 Belarusian State University of Transport – Gomel, Belarus
  • 4 Belarusian National Technical University –Minsk, Belarus

Abstract

This part of the paper devoted to the development of mechanism and machine mechanics in Belarus and cooperation with Bulgarian official and public organizations (see the first part of the paper). Successively the input in mechanism and machine terminology, standardization (elaboration of complex of standards on reliability, tribo-fatigue, gear failure modes etc.), quality management (system, techniques and tools, quality factors of machines and their components, methods of designing gear manufacturing processes etc.) are covered. It is considered informational support above mentioned topic through the edition of scientific journals; participation of Belorussian and Bulgarian scientist and engineers in international conferences, provided by one or other parties, as well as third one; interaction between scientific institutions.

Keywords

References

  1. Lotte O.S. Foundations of composition of scientific-technical terminology, Moscow, Publishing House Academy of Science of USSR, Issue 157, 1961 (in Russian).
  2. How to work under terminology. Foundations and techniques, Moscow, Nauka, Issue 76, 1968 (in Russian).
  3. Short technical guide on elaboration and adjustment of scientific-technical terminology, Moscow, Nauka, 1979 (in Russian).
  4. Theoretical mechanics. Terminology. Collected book of recommended terms. Issue 90. Academy of Science of USSR, Moscow, Nauka, 1977 (in Russian).
  5. Theory of mechanisms and machines terminology. Lettering. Collected book of recommended terms. Issue 99. Academy of Science of USSR. Moscow: Nauka, 1984 (in Russian).
  6. Mechanical oscillations. Foundation notions. Terminology. Lettering. Collected book of recommended terms. Issue 106. Academy of Science of USSR. Moscow, Nauka, 1987 (in Russian).
  7. Krainev A.F. Mechanics of machines. Fundamental dictionary, Moscow, Mashinostroenie, 2000 (in Russian).
  8. Terminology for the Theory of Machines and Mechanisms, IFToMM, Mechanism and Machine Theory, 18 (6), 1983, 379-407.
  9. IFToMM Commission Standards for Terminology: Terminology for the Theory of Machines and Mechanisms / Mechanism and Machine Theory (763 definitions), 20 (5), 1991, 435-539.
  10. IFToMM Permanent Commission for Standardization of Terminology: Terminology for the Mechanism and Machine Science. Guest Editor Theodor Ionescu / Mechanism and Machine Theory. (771 definitions in French, German and Russian; 1594 definitions in English). 38 (7-10), 2003, 597- 1111.
  11. URL: www.iftomm.net, www.iftomm.3me.tudelft.nl.
  12. Peisach, E.Е. Theory of Mechanisms and Machines, 2 (2), 2004, 80-94, (URL: http://tmm.spbstu.ru). (in Russian).
  13. Peisach, E. Proc. of the Sci. Seminar “Terminology of the Theory of Machines and Mechanisms”, Eds. R.T. Tolocka and A. Kondratas (June 25-30, 2000, Kaunas. Lithuania), 2000, 13-19.
  14. Antonyuk V.E., Ishin N.N., Kane M.M., Komissarov V.V., A.S. Skorokhodov, Sosnovskiy L.A., Starzhinsky V.E., Tesker E.I., Messenger of Iznevsk state technical university, 20 (2), 2017, 102-106 (ISSN 1813-7903).
  15. Antonyk V.E., Ishin N.N., Kane M.M., Komissarov V.V., Skorokhodov A.S., Sosnovskiy L.A., Starzhinsky V.E., Tesker E.I., Intellectual systems in Manufacturing, 15 (2), 2017, 76-81 (ISSN 1813-7911) (in Russian).
  16. Berestnev O.V., Starzhinsky V.E., Soliterman Yu.L., Goman A.M., Shalobaev E.V., Proc. of the Sci. Seminar “Terminology of the Theory of Machines and Mechanisms”, Eds. R.T. Tolocka and A. Kondratas (June 25-30, 2000, Kaunas. Lithuania), 2000, 21-27.
  17. Kane M.M., Starzhinsky V.E., Proc. of the Sci. Seminar “Terminology for the Mechanism and Machine Sciences” (June, 29 – July, 4, 2008. Lyon, France), Ed. Didier Remond, 2008, 77-80.
  18. Starzhinsky V.E., Goldfarb V.I., Algin V.B., Shalobaev E.V., Kane M.M., Sci. Teach. Journ. “Theory of Mechanisms and Machines”, 12 (2), 2014, 81-102) (in Russian).
  19. Starzhinsky V.E., Goldfarb V.I., Algin V.B., Shalobaev E.V., Kane M.M., Proc. of the Sci. Seminar “Terminology for the Mechanism and Machine Science”. (June 23-29, 2014, Saint- Petersburg, Russia), Eds. Victor Starzhinsky and Eugeni Shalobaev, 2016, 13-42.
  20. Starzhinsky V.E., Kane M.M., Proc. of the Sci. Seminar “Terminology for the Mechanism and Machine Science” (June 23-29, 2014, Saint-Petersburg, Russia) Eds. Victor Starzhinsky and Eugeni Shalobaev. 2016, 43-46.
  21. Pavlovic N.T., Klein Breteler A.J., Centner L., Starzhinsky V.E. Proc. of the Sci. Seminar “Terminology for the Mechanism and Machine Science” (June 23-29, 2014, Saint-Petersburg, Russia) Eds. Victor Starzhinsky and Eugeni Shalobaev. 2016, 47-53.
  22. Starzhinsky V.E., Shalobaev E.V., Kane M.M., Goldfarb V.I., New Advances in Mechhanisms Mechanical Transmissions and Robotics, Eds. Corves B., Lovasz E.-C., Hüsing M., Maniu I., Gruescu C., Springer International Publishing AG, 46, 2017, 209-216 (ISBN 978-3-319-45450-4).
  23. Starzhinsky V.E., Antonyuk V.E., Kane M.M., Shilko S.V., Sci. Teach. Journ. “Theory of Mechanisms and Machines”, 14 (27), 2016, 69-76. (ISSN 2079-021X).
  24. Reference-dictionary book on gearing. Rus.-Eng.-Germ.- French. Ed. V.E. Starzhinsky, Gomel, MPRI NASB, 2011 (ISBN 978-985-6812-15-9).
  25. Shalobaev E.V., Shil‟ko S.V., Tolocka R.T., Starzhinsky V.E., Iurkova G.N., Surikov D.G., New Advances in Mechanisms, Mechanical Transmissions and Robotics, Eds. Corves B., Lovasz E.-C., Hüsing M., Maniu I., Gruescu C., Springer International Publishing AG, 46, 2017, 217-228 (ISBN 978-3- 319-45450-4).
  26. RB Standard STB 1251-2000. Gear wheels toothed cylindrical. Methods of designing technological processes of manufacturing. Minsk, Gosstandart, 2001 (in Russian).
  27. Interstate Standard GOST 306638-99. Tribo-fatigue. Terms and definitions. Interstate council on standardization, metrology and certification, 2000 (in Russian).
  28. Interstate Standard GOST 30754-2001. Tribo-fatigue. Methods of wear-fatigue test operation. Interstate council on standardization, metrology and certification, 2001 (in Russian).
  29. Interstate Standard GOST 30755-2001. Tribo-fatigue. Machines for wear-fatigue test operation common specification requirements. Interstate council on standardization, metrology and certification, 2002 (in Russian).
  30. RB Standard STB 1448-2004. Tribo-fatigue. Method of wear-fatigue test operation. Friction-mechanical test operation. Gosstandart RB, 2005 (in Russian).
  31. RB Standard STB 1758-2007. Tribo-fatigue. Method of coincident test operation on bending and contact fatigue of gear wheel materials, Minsk, Gosstandart RB, 2007 (in Russian).
  32. RB Standard STB 1917-2008. Farm machinery. Complex system for promotion of reliability, Minsk, Gosstandart RB, 2009 (in Russian).
  33. RB Standard STB 2465-2016. Reliability in engineering. Management of reliability of technically complex products, Minsk, Gosstandart RB, 2017 (in Russian).
  34. Starzhinsky V.E., Soliterman Yu.L., Goman A.M., Ossipenko S.A., Arnaudov K.B. Coll. of papers “Problems of quality and durability of gear trains, reducers, their parts and components ZP-2006”, 2006, 70-77 (in Russian).
  35. Interstate Standard GOST 31381-2009. Gear wheels. Modes of failures. Classification and description, Minsk, Gosstandart RB, 2010 (in Russian).
  36. Starzhinsky V.E., Soliterman Yu.L., Tesker E.I., Goman A.M., Ossipenko S.A. Scientific-Technical Journal “Friction and wear”, 29 (5), 2008, 465-482 (in Russian).
  37. Starzhinsky V.E., Soliterman Yu.L., Goman A.M., Ossipenko S.A. Journal of Friction and Wear, 29 (5), 2008, 340-353.
  38. Starzhinsky V.E., Goldfarb V.I., Shil‟ko S.V., Shalobaev E.V., Tesker E.I. Intellectual Systems in Manufacturing, 15 (3), 2017, 51-61 (in Russian).
  39. Starzhinsky V.E., Soliterman Yu.L. Journal “Reducers and Drives”, 1-2, 2007, 21-23 (in Russian).
  40. Kane M.M., Ivanov B.V., Koreshkov V.V., Skhirtladze A.G., Systems, Methods and Tools of Quality Management, Moscow–Saint-Petersburg, Publishing House “Piter”, 2008 (in Russian).
  41. Kane M.M., Ivanov B., Starzhinsky V.E. Proc. of the 7-th Int. Symp. “Machine and Industrial Design in Mechanical Engineering KOD 2012”, (May 24-26, 2012, Balatonfüred, Hungary. University of Novi Sad), 7, 2012, 327-330.
  42. Starzhinsky V.E., Kane M.M. Proc. of the 26th Working Meeting on Standardization of Terminology – WMST 2016 (September 4-9, 2016, Bucharest, Romania), 2016, 5-12.
  43. International science-technical journal “Mechanics of Machines, Mechanisms and Materials” (http://mmmm.by/ru/) (in Russian).
  44. Coll. of scientific papers “Actual problems of machine science” (http://oim.by/ru/izdaniya/sbornik.html) (in Russian).
  45. Belyi V.A., Shcherbakov S.V., Starzhinsky V.E. Program of the National Scient. and Eng. Conf. with Int. Participation “Plastics in Mech. Eng.” (November 1-4, 1976, Varna, Bulgaria).
  46. Starzhinsky V.E., Ossipenko S.A., Shcherbakov S.V. Program of the National Sci. and Eng. Conf. with Int. participation "Plastics in Mech. Eng." (June 5-7, 1981, Plovdiv, Bulgaria).
  47. Kupchinov B.I., Baranov Yu.D. Program of the National Sci. and Eng. Conf. with Int. participation "Plastics in Mech. Eng." (June 5-7, 1981, Plovdiv, Bulgaria).
  48. Starzhinsky V.E., Kudinov A.T. Proc. of the International Congress "Gear Transmissions‟95" (September 26-28, 1995, Sofia, Bulgaria) 3, 1995, 88-90.
  49. Starzhinsky V.E., Kudinov A.T., Ossipenko S.A., Lee S.C. Proc. of the International Congress "Gear Transmissions‟95" (September 26-28, 1995, Sofia, Bulgaria) 3, 1995, 90-93.
  50. Starzhinsky V.E., Soliterman Yu.L., Goman A.M., Shalobaev E.V., Shcherbakov S.V. Proc. of the 1st Int. BAPT conference “Power Transmissions‟03” (September 11-12, 2003, Varna, Bulgaria). 1, 2003, 180-186.
  51. Starzhinsky V.E., Ossipenko S.A., Starominsky V.B., Slepov Yu.A. Proc. of the 1st Int. BAPT Conf. “Power Transmissions‟03” (September 11-12, 2003, Varna, Bulgaria). 1, 2003, 51-55.
  52. Starzhinsky V., Ossipenko S., Shalobaev Y., Monahov Y., Proc. of the 2nd Int. Conf. “Power Transmissions 2006” (April 25-26, 2006, Novi Sad, Serbia and Montenegro, Faculty of Technical Sciences), 2006, 95-102.
  53. Raikhman G., Starzhinsky V. Proc. of the 2nd Int. Conf. “Power Transmissions 2006” (April 25-26, 2006, Novi Sad, Serbia and Montenegro, Faculty of Technical Sciences), 2006, 331-338.
  54. Basinyuk V.I., Mardosevich E.I., Starzhinsky V.E., Khizhenok V.F. Proc. of the 3rd Int. Conf. “Power Transmissions 2009” (October 1-2, 2009, Kallithea, Khalkidhiki, Greece), 2009, 133-138.
  55. Starzhinsky V.E., Shil‟ko S.V., Shalobaev E.V., Rackov M. Proc. of the 6th Int. BAPT Conf. “Power Transmissions-2019” (Varna, Bulgaria), 2019.
  56. Starzhinsky V., Shil‟ko S., Shalobaev E., Rackov M., Algin V., Dubrovsky V. Proc. of the 7th Int. BAPT Conf. “Power Transmissions-2020” (June 10-13, 2020, Borovets, Bulgaria), 2020, 35-42. https://stumejournals.com/journals/mtm/2020/3/100.
  57. Algin V., Ishin M., Paddubka S., Starzhinsky V., Shil‟ko S., Rackov M., Čavić M. Proc. of the 7th Int. BAPT Conf. “Power Transmissions-2020” (June 10-13, 2020, Borovets, Bulgaria), 2020, 43-55. https://stumejournals.com/journals/mm/2020/2.
  58. Arnaudov K., Belchev B., Plastic gear wheels, Sofia: Tehnika, 1979 (in Bulgarian).
  59. Belchev B., Arnaudov K., Kozlova A. Gear Trains with Plastic Wheels. Sofia: Tehnika, 1988 (in Bulgarian).
  60. Non-destructive Testing and Repair of Pipelines, Ed. by E.N. Barkanov, A. Dumitrescu and I.A. Parinov. Switzerland, Springer, 2017.
  61. Innovative Solutions in Repair of Gas and Oil Pipelines, Ed. by E. Barkanov, M. Mihovski and V. Sergienko. Sofia, Bulgarian Society for Non-destructive Testing Publishers, 2016.
  62. Kozhushko V.V., Sergienko V.P., Myshkovetc N.N. Memoirs of the Faculty of Physics, 5, 2017, 1-4 (in Russian).
  63. Kozhushko V.V., Sergienko V.P., Mirchev Y.N., Alexiev A.N. Chapter 14 in “Non-destructive Testing and Repair of Pipelines”, ed. by E.N. Barkanov, A. Dumitrescu, I.A. Parinov. Springer, 2018, 209-225.
  64. Kozhushko V.V., Sergienko V.P., Int. Journ. “NDT Days” (June 4-8, 2018, Sozopol, Bulgaria) 1, 4, 2018, 467-470.
  65. Bukharov S.N., Alexiev A.R. Int. Journ. “NDT Days” (June 17-21, 2019, Sozopol, Bulgaria) 2, 3, 2019, 278-283.
  66. Bukharov S.N., Sergienko V.P., Kozhushko V.V., Kudina E.F., Tuleika A.S., Iankov R., Datcheva M., Alexiev A. Polymer Materials and Technology 7(1), 2021, 6-22 (in Russian).

Article full text

Download PDF