Machines. Technologies. Materials.
Vol. 16 (2022), Issue 7, pg(s) 231-233

TECHNOLOGIES

Study on the influence of cutting fluid on flat grinding process

  • 1 Transylvania University of Brasov Romania

Abstract

In the paper is presented a study regarding the influence of different factors on the roughness of machined surfaces obtained by manufacturing process of flat grinding. The workpieces that were used on the experimental tests were radial bearing ring with needles made of steel hardened to 60-64 HRC. It were taken into consideration factors like, the size of the machined surface, the traverse speed, the grain size of abrasive grinding wheels, cutting fluid.
During the experiments was used the method of the Box-plot graphical representation that aims to observe and characterize the distribution of values obtained on these tests.

Keywords

References

  1. Awiszus, B., Matthes, K-J., Duerr, H., Bast, J. –Grundlagen der Fertigugstechnik, Seiten 125-130, Editura Hanser, 2006
  2. Beyer, P. –Hochproduktive Vit- CBN- Schleifwerkzeuge, in SMM Fertigungstechnick, Nr.4- 2005, Seiten 60- 63.
  3. Bock, R: Vorlesung Fertigungstechnick, Übung Zeitspanunsvolumen, Juni 2006
  4. K.D. Bouzakis, C. Karachaliou: Process Models in grinding, based on three dimensional description of the grinding wheel topomorphy, North American Manufacturing Research Conference Proceedings, May 19-22, 1985
  5. Brinksmeier, H., Koch, T. –Auswirkungen des mikrobiellen befalls von wassermischten Kühlschmierstoffen auf das Zerspanergebnis , Presentation bei Resourceshonende Metallbearbetung, Arbeitkreis Kuehlschmierstoffe, IWT, Bremen, Sept.2002
  6. Kleber, M. –Kuehlschmierstoffe: Analytisch-chemische Charakterisierung und Untersuchungen zur mutagenen Wirkung, Inaugural- Dissertation zur Erlangung des Doktorgrades der Naturwissenschaften, Dortmund, 2000, Seiten 5- 20

Article full text

Download PDF