Machines. Technologies. Materials.
Vol. 17 (2023), Issue 1, pg(s) 46-49

MATERIALS

Study of aluminum content on the structure and phase composition of synthesized aluminum-matrix composites

  • 1 Frantsevich Institute for Problems in Materials Science, NASU, Kyiv, Ukraine

Abstract

The work shows that there is no significant change in the phase composition of composites with a change in the synthesis temperature, so we can use pre-synthesized heats at a temperature of 950 oC to obtain hot-stamped aluminum-based composites. The best characteristics of the synthesized titanium carbide were obtained for the composition 45Al-11C-44Ti (%, wt.). The lattice period of titanium carbide for this sample is 0.4324, and the particle size of titanium carbide formed after sintering is 0.8-1.5 μm. The influence of the component composition of the initial charge on the features of the structure and the phase composition of the thermally synthesized heat of the Al-C-Ti system was established.

Keywords

References

  1. Kainer K.U. Metal Matrix Composites // Weinheim, Germany: Verlag GmbH & Co. KGaA, 2006.
  2. Adebisi A.A., Maleque M.A., Rahman Md.M. Metal matrix composite brake rotor: historical development and product life cycle analysis. International Journal of Automotive and Mechanical Engineering. – 2011. - Vol. 4. - p. 471 – 480.
  3. Амосов, А.П., Луц А.Р., Латухин Е.И., Ермошкин А.А. Применение процессов СВС для получения in-situ алюмоматричных композиционных материалов, дискретно армированных наноразмерными керамическими частицами: обзор // Изв. Вузов. Цветная металлургия. - 2016. - №1.- С. 39- 49
  4. Rana R.S, Purohit R., Das S. Review of Recent Studies in Al Matrix Composites // International Journal of Scientific Engineering and Research. – 2012. - Vol. 3. – P. 1-16
  5. Kennedy A.R and Wyatt S.M. Characterising particle–matrix interfacial bonding in particulate Al–TiC MMCs produced by different methods // Composites Part A: Applied Science and Manufacturing. – 2001. - Vol. 32. – Issues 3-4. - P. 555 – 559.
  6. Das B., Roy S., Rai R.N., Saha S.C. Development of an in-sity synthesized multi-component reinforced Al – 4.5%Cu-TiC metal matrix composite by FAS technique – Optimization of process parameters // Eng. Sci. & Technology, an International Journal.– 2016. - Vol. 19 (1). –P. 279 – 291.
  7. Баглюк, Г.А., Шишкина Ю.А. Новые композиционные дисперсно-упрочненные материалы на основе алюминия // Технологические системы. – 2011. – № 4 (57). – С. 36-43.
  8. Shishkina Y., Baglyuk G., Мamonova А., Tihonova I. Specific features of structure formation in Al-Ti-C powder master alloys after thermal synthesis // International Scientific Journal «Machines. Technolо Materials». – 2012. – Vol. 12. – P. 45-49.
  9. Shishkina, Y.A. Baglyuk G.A., Mamonova A.A., Tikhonova I. B. Effect of carbon and aluminum contents on the structurization of Al–Ti–C powder master alloy during reaction synthesis // International Scientific Journal «Machines. Technolоgies. Materials». – 2013. – Vol 52. – No 3-4. – P. 154–160.
  10. Богачева А.Г. Баглюк Г.А., Шишкина Ю.А. Получение и свойства дисперсно-упрочненных легких сплавов / А.Г. Богачева, // Технологические системы. – 2013. – № 6 (64). – С. 23-38.
  11. Луц. А. Р. Самораспространяющийся высокотемпературный синтез модифицирующих лигатур и композиционных сплавов в расплаве алюминия с применением флюсов: автореф. дис. канд. техн. наук: 01.04.17 / А. Р. Луц. – Самара, 2006. – 25 с.
  12. Савицкий А. П. Современные представления о спекании в жидкой фазе // А. П. Савицкий / Порошковая металлургия. – 1987. – №8. – с. 35-41.

Article full text

Download PDF