Machines. Technologies. Materials.
Vol. 17 (2023), Issue 4, pg(s) 139-140

MACHINES

Experimental setup for studying the behavior of sheet blanks during cyclic alternating bending for roller levelling application

  • 1 Belarusian National Technical University
  • 2 The Physical-Technical Institute of the NAS of Belarus

Abstract

Roller levelling is a technological process of metal forming, used to minimize the flatness of sheet blanks and reduce the level of residual stresses. When levelling, the workpiece is subjected to cyclic alternating bending with decreasing amplitude. The report presents an experimental testing set-up designed and used to determine the mechanical response of sheet steel blanks under different loading modes. The equipment is described and the first results are presented.

Keywords

References

  1. Korolev A.A., Konstrukciya i raschet mashin i mekhanizmov prokatnyh stanov [Design and calculation of machines and mechanisms of rolling mills] (Metallurgiya Publ., Moscow, 1985). 376 p. [in Russian]

Article full text

Download PDF