Machines. Technologies. Materials.
Vol. 19 (2025), Issue 1, pg(s) 30-32

TECHNOLOGIES

Investigation of extruded polyethylene blend films tensile creep elongation with different open holes configurations

  • 1 Technical University Sofia, Bulgaria,branch Plovdiv

Abstract

In this article,tensile creep elongation of PE plastic films with two configurations of open holes stressed at the incremental temperatures of 23,30,37,43,51,58 degrees and a constant dead weight of 50 kg will be analyzed. The aim of the article is to analyze influence of the two configurations of open holes on the relative elongation. The test was conducted with the same blend, under the same test conditions. The test was conducted entirely according to the conditions established in the ASTM D6992 standard.

Keywords

References

  1. Liu, Dongxu & Zhao, Shicai & Zhang, Deyuan. (2024). Experimental and numerical studies of the open hole tensile strength of drilled‐ and molded‐ hole unidirectional laminates. Polymer Composites. 10.1002/pc.29145.
  2. Saeheaw T.,(2024),Analytical optimization of open hole effects on the tensile properties of SS400 sheet specimens using an integrated FFD-CRITIC-DFA method,Heliyn vol. 10, https://doi.org/10.1016/j.heliyon.2023.e23920
  3. Supar, Khairi , Ahmad, Hilton. (2017). XFEM Modelling of Multi-holes Plate with Single-row and Staggered Holes Configurations. MATEC Web of Conferences. 103. 02031. 10.1051/ matecconf/ 201710302031.
  4. Huang, Huiwen & Liu, Jinglong & Yao, Yan & Wang, Lizhen & Fan, Yubo. (2024). Stress concentration in the auxetic porous screw and its fatigue behavior. Composite Structures. 345. 118403. 10.1016/j.compstruct.2024.118403.
  5. Pirkle, Matthew K.(2020), Effect of Multiple Holes on Stress Concentrations and Damage Initiation in a Quasi- Isotropic Composite Laminate,dissertation.
  6. Malakhov, Andrei. (2021). Optimization of open-hole variable stiffness composite plates under tensile loading using curved continuous fibers. IOP Conference Series: Materials Science and Engineering. 1129. 10.1088/1757- 899X/1129/1/012019.
  7. Zhang, Yu & Huang, Qiyu & Zhen, Hanpeng & Zhang, Xun & Wang, Yijie & Xu, Zhenkang. (2024). Effect of Polyethylene Pipe on Wall Sticking of Waxy Oil in Low- Temperature Transportation. 10.1115/IPC2024-132300
  8. Ghosh S.(2024),Analysis of Creep Deformation. 10.20944/preprints202412.1894.v1
  9. Hou, Rongbin & Cui, Qingzhe & Liu, Hui & Shi, Yanke & Chang, Yanjun. (2024). A nonlinear visco-elasto-plastic creep model for sandstone considering creep initiation conditions and experimental verification. Mechanics of Time-Dependent Materials. 29. 10.1007/s11043-024-09753
  10. Popiolek, Vincenzo & McCreary, Jordan & Chlebowski, Cole & Perez-Palma, Patrica & Pickrell, Gary & Risch, Brian. (2024). Sustainable Options in Polyethylene Jackets for Optical Fiber Cables.
  11. Çınar, Kenan. (2024). Enhancement of laminate open-hole tensile strength by considering fiber waviness around holes. Journal of Manufacturing Processes. 131. 766-780. 10.1016/j.jmapro.2024.09.079.

Article full text

Download PDF