Machines. Technologies. Materials.
Vol. 19 (2025), Issue 12, pg(s) 460-462

MACHINES

Research on deformations of a flexible screw sectional working body

  • 1 National University of Life and Environmental Sciences of Ukraine, Kyiv, Ukraine

Abstract

The article presents the construction of a flexible sectional screw working body, the use of which allows to improve the performance of flexible screw conveyors with low material consumption of the working body, which reduces energy costs for the transportation process. Based on the results of static experimental studies, the nature of the change in the dependence of torque on the angle of twist of individual sections has been established.

Keywords

References

  1. Balyuk S.A., Kucher A.V., Solokha M.O., Solovei V.B., Smirnov K.B., Momot G.F., Levin A.Ya. (2022). The influence of armed aggression and military actions on the current state of the soil cover, damage and loss assessment, restoration measures. Kharkiv: FOP Brovin O.V., 2022, 102 p.
  2. Bulgakov V., Trokhaniak O., Klendii M. et al. Research on the Impact of the Operating Modes and Main Design Parameters on the Efficiency of the Machine for Preparing and Packing Slaked Lime. INMATEH: Agricultural Engineering. 2022. 67(2). P. 323–330. doi: 10.35633/inmateh-67-33.
  3. Hevko R.B., Klendiy M.B., Klendiy O.M. Investigation of a transfer branch of a flexible screw conveyor. INMATEH – Agricultural engineering. 2016. V. 48. № 1. Р. 29–34.
  4. Lech M. Mass flow rate measurement in vertical pneumatic conveying of solid. Powder Technology. 2001. V. 114. Is. 1–3. Р. 55–58.
  5. Hevko R.B., Rohatynskyi R.M., Rozum R.I. et al. Increasing the technological level of loading and reloading processes of materials in screw conveyors: monograph. Ternopil: Osadtsa Yu.V., 2018. 180 p.
  6. Bulgakov V., Olt J., Ivanovs S. et al. Research of a contact stresses in swivel elements of flexible shaft in screw conveyor for transportation of agricultural materials. Estonian Academic Agricultural Society. Agraarteadus. 2022. 33(1). Р. 67–73. doi:10.15159/jas.22.12
  7. Pylypaka S.F., Klendii M.B., Klendii O.M. Particle motion over the surface of a rotary vertical axis helicoid. (2017) INMATEH - Agricultural Engineering, 51 (1), pp. 15–28.
  8. Hevko R.B., Rozum R.I., Klendiy O.M. Development of design and investigation of operation processes of loading pipes of screw conveyors, INMATEH: Agricultural engineering. 2016. V. 50. №. 3. Р. 89–94.
  9. Hevko R., Rohatynskyi R., Hevko M. et al. Investigation of sectional operating elements for conveying agricultural materials. Research in Agricultural Engineering. 2020. 66(1), 18–26. The website of the journal: https://www.agriculturejournals.cz/publicFiles/25_2019-RAE.pdf
  10. Hevko R., Vitrovyi A., Klendii O., Liubezna I. Design engineering and substantiation of the parameters of sectional tools of flexible screw conveyors. Bulletin of the Transilvania University of Brasov. 2017. V. 10 (59). рр. 39–46.
  11. Bulgakov V., Olt J., Ivanovs S. et al. Research of a contact stresses in swivel elements of flexible shaft in screw conveyor for transportation of agricultural materials. Agraarteadus. 2022. V. 33. № 1. P. 67–73. doi: 10.15159/jas.22.12
  12. Trokhaniak O.M., Hevko R.B., Lyashuk O.L., Dovbush T.A., Pohrishchuk B.V., Dobizha N.V. Research of the of bulk material movement process in the inactive zone between screw sections. (2020) INMATEH – gricultural Engineering, 60 (1), pp. 261–268.
  13. Hevko R.B., Zalutskyi S.Z., Hladyo Y.B., Tkachenko I.G., Lyashuk O.L., Pavlova O.M., Pohrishchuk B.V., Trokhaniak O.M., Dobizha N.V. Determination of interaction parameters and grain material flow motion on screw conveyor elastic section surface. (2019) INMATEH – Agricultural Engineering, 57 (1), pp. 123–134.
  14. Bulgakov V., Trokhaniak O., Adamchuk V., Chernovol M., Korenko M., Dukulis I., Ivanovs S. A Study of Dynamic Loads of a Flexible Sectional Screw Conveyor. (2022) Acta Technologica Agriculturae, 25 (3), pp. 131–136.

Article full text

Download PDF