Machines. Technologies. Materials.
Vol. 19 (2025), Issue 9, pg(s) 322-323

TECHNOLOGIES

Investigation on hardness Shore D of 3D printed parts of Acrylonitrile butadiene styrene

  • 1 Technical University of Sofia, Branch Plovdiv

Abstract

In this article, hardness Shore D of 3D printed ABS samples were investigated. The experimental results were analytical and statistically processed.

Keywords

References

  1. M.N. Ahmad; M.R. Ishak; M. Mohammad Taha; F. Mustapha; Z. Leman; D.D. Anak Lukista; I. Ghazali, Application of Taguchi Method to Optimize the Parameter of Fused Deposition Modeling (FDM) Using Oil Palm Fiber Reinforced Thermoplastic Composites. Polymers 2022, 14, 2140. https://doi.org/10.3390/polym14112140
  2. Fdsfds Rajendran, Sundarakannan & Palani, Geetha & Sanjeevi, Shankar & Prabu, V. & Trilaksana, Herri & Sundaram, Vickram & Marimuthu, Uthayakumar & Yang, Yo-Lun & Shanmugam, Vigneshwaran. (2025). A review on AI integration with FDM printing to enhance precision, efficiency, and process optimization. Journal of Reinforced Plastics and Composites. 10.1177/07316844251358587.
  3. Hussam, Heba & Soliman, MEmad & Hassab-Allah, Ibraheem & Abdelrhman, Yasser. (2025). Effect of annealing on FDM-manufactured ABS parts. The International Journal of Advanced Manufacturing Technology. 138. 2233-2243. 10.1007/s00170-025- 15455-5.
  4. Pham, Gia Khanh & Domes, Ruth & Mavis, Ümit & Ernstberger, Johannes & Seidel, Christian & Eulenkamp, Constanze & Hausner- Henzel, Christine & Nguyen, Anh & Vu, Pham. (2025). Indentation hardness of 3D-printed metals. Rakenteiden Mekaniikka. 58. 86- 109. 10.23998/rm.148552.
  5. Song, Enpeng & Jin, Quan & Cai, Ke. (2025). Research on the hardness testing method of ceramsite proppants. Journal of Physics: Conference Series. 3021. 012009. 10.1088/1742- 6596/3021/1/012009.
  6. Schmeiser, Felix & Schramm, Wofgang & Mayinger, Felicitas & Baumert, Uwe & Stawarczyk, Bogna. (2025). Effect of Filler Type, Content, and Silanization on the Flexural Strength, Elastic Modulus, Shore D Hardness, and Two-Body Wear of PAEK Compounds. Materials. 18. 2736. 10.3390/ma18122736.
  7. Ganapathi, Chethan & K C, Sunil & Maddani, Mahagundappa & Narayana, Y.. (2023). A Study on Shore D Hardness of Areca Husk Fibre Reinforced Polyester Resin Composite: Impact of Fibre Maturity. Materials Science Forum. 1111. 83-88. 10.4028/p-inPOp0.
  8. Kuleyin, Hamdi & Budak, Selahattin & Yasan, Ömer & Gümrük, Recep. (2025). Characterization of thermal, chemical, mechanical, and fatigue behavior of 3D printed ABS-based elastomeric blends: ABS/EVA and ABS/TPU. Polymer Testing. 145. 108763. 10.1016/j.polymertesting.2025.108763.
  9. Liu, Yujia & He, Hui & Zhang, Cheng & Zhai, Hongyu & Han, Luyun & Yang, Chuangbiao. (2025). Enhancing the Properties of ABS/PET Blends for 3D Printing by Functionalized Janus Nanosheets. Polymer Engineering & Science. n/a-n/a. 10.1002/pen.70045.
  10. Karupaiah, Vigneshwaran & Narayanan, Venkateshwaran & Nagarajan, Rajini & Ismail, Sikiru & Mohammad, Faruq & Al- Lohedan, Hamad & Krishnan, Associate Prof. Dr. Kumar. (2024). Performance evaluation of 3D-printed ABS and carbon fiber-reinforced ABS polymeric spur gears. BioResources. 19. 2796- 2810. 10.15376/biores.19.2.2796-2810.

Article full text

Download PDF