Machines. Technologies. Materials.
Vol. 20 (2026), Issue 2, pg(s) 63-64

TECHNOLOGIES

Possibilities for accelerating chemical-thermal treatment

  • 1 Faculty of Mechanical Engineering – Belarusian National Technical University, Belarus

Abstract

The intensification methods for carburizing and nitrocarburizing investigated in this study include the use of biochar, preliminary oxidation, and plastic deformation. The possibility of combining oxidation and plastic deformation was also examined.

Keywords

References

  1. Voroshnin L.G., Mendeleeva O.L., Smetkin V.A. Teoriya i tekhnologiya khimiko-termicheskoi obrabotki: uchebnoe posobie [Theory and technology of chemical-thermal treatment: study guide]. Moscow; Minsk, Novoe znanie Publ., 2010. 304 p. (in Russian).
  2. Konstantinov V.M., Kukareko V.A. Puti energosberezheniya pri termicheskoi i khimiko-termicheskoi obrabotke stalei za schet uskoreniya diffuzionnykh protsessov [Approaches to energy saving in thermal and thermochemical treatment of steels through acceleration of diffusion processes]. Lit'e i metallurgiya [Foundry production and metallurgy], 2023, no. 4, pp. 72–80 (in Russian).
  3. Voroshnin L.G., Konstantinov V.V. Aktual'nye problemy khimiko-termicheskoi obrabotki [Topical problems of chemical-thermal treatment]. Nauka i tekhnika, 2002, no. 4, pp. 22–26 (in Russian).
  4. Panteleenko F.I., Liakhovich L.S., Kukharev B.S. O klassifikatsii sposobov intensifikatsii protsessov khimiko-termicheskoi obrabotki metallov i splavov [On the classification of methods for intensification of thermochemical treatment of metals and alloys]. Metallurgiya: respubl. mezhvedom. sb. nauch. tr. [Metallurgy: Republican interdepartmental collection of scientific papers]. Minsk, Vysheishaya shkola Publ., 1980, pp. 5–6 (in Russian).
  5. Petrova L.G., et al. Intensifikatsiya protsessov khimiko-termicheskoi obrabotki stalei [Intensification of thermochemical treatment processes of steels]. Moscow, MADI Publ., 2019. 160 p. (in Russian).
  6. Kukareko V.A., Gatsuro V.M., Grigorchik A.N., Chichin A.N. Matematicheskoe modelirovanie i mekhanizm ukrupneniya austenitnogo zerna pri vysokotemperaturnom nagreve legirovannykh konstruktsionnykh stalei [Mathematical modeling and mechanism of austenite grain coarsening during high-temperature heating of alloyed structural steels]. Mekhanika mashin, mekhanizmov i materialov, 2019, no. 3(48), pp. 58–68 (in Russian).
  7. Voroshnin L.G., Voroshnin A.L. Novye podkhody k sozdaniyu i ispol'zovaniyu poroshkovykh nasyshchayushchikh sred dlya khimiko-termicheskoi obrabotki [New approaches to the development and use of powder saturating media for chemical-thermal treatment]. Vesci ANB. Seryya FTN., 1997, no. 3, pp. 13–17 (in Russian).
  8. Konstantinov V.M. Diffuzionno-legirovannye splavy dlya zashchitnykh pokrytii. Diss. dokt. tekhn. nauk [Diffusion-alloyed alloys for protective coatings. Dr. tech. sci. diss.]. Minsk, 2008. 474 p. (in Russian).
  9. Protasevich G.F., Voroshnin L.G. Izobretatel'skaya rabota v oblasti khimiko-termicheskoi obrabotki metallov [Inventive activity in the field of chemical-thermal treatment of metals]. Metallovedenie i termicheskaya obrabotka metallov, 1988, no. 5, pp. 26–30 (in Russian).
  10. Konstantinov V.M., Leshok V.A. Aktivatsiya termodiffuzionnogo nasyshcheniya nizkouglerodistoi stali metodom okisleniya poverkhnosti [Activation of thermodiffusion saturation of low-carbon steel by surface oxidation]. Fundamental'nye issledovaniya i innovatsionnye tekhnologii v mashinostroenii: nauch. tr. VIII Mezhdunar. nauch. konf., Moscow, 19–20 November 2024 [Fundamental research and innovative technologies in mechanical engineering: Proc. 8th Int. Sci. Conf.]. Moscow, Institut mashinovedeniya im. A.A. Blagonravova RAN, 2024, pp. 117–118 (in Russian).
  11. Konstantinov V.M., Leshok V.A., Shtempel' O.P. Analiz vliyaniya predvaritel'noi i tsiklicheskoi plasticheskoi deformatsii na khimiko-termicheskuyu obrabotku konstruktsionnykh stalei [Analysis of the effect of preliminary and cyclic plastic deformation on chemical-thermal treatment of structural steels]. Mekhanika mashin, mekhanizmov i materialov, 2024, no. 1(66), pp. 37–42. doi: 10.46864/1995-0470-2024-1-66-37-42 (in Russian).
  12. Luksha L.K. Tverdyi karbyurizator [Solid carburizer]. Author's certificate SU 111009, publ. date 01 Jan 1957 (in Russian).
  13. Chuchkalov M.V., et al. Sostav karbyurizatora dlya tsementatsii detalei iz nizkouglerodistoi stali [Carburizer composition for carburizing parts made of low-carbon steel]. Patent RU 2690630, publ. date 04 Jun 2019 (in Russian).
  14. Spiridonova I.M., et al. Karbyurizator dlya tsementatsii stal'nykh izdelii [Carburizer for carburizing steel products]. Author's certificate SU 1836486, publ. date 23 Aug 1993 (in Russian).
  15. Misyukova A.D., Yankovskii S.A., Gorshkov A.S. Otkhody pererabotki tsitrusovoi biomassy kak energeticheskii tsennyi produkt [Citrus biomass processing wastes as an energy-valuable product]. Mezhdunarodnyi zhurnal prikladnykh i fundamental'nykh issledovanii [International Journal of Applied and Fundamental Research], 2021, no. 11, pp. 76–80. doi: 10.17513/mjpfi.13316 (in Russian).
  16. Ding Y., Wang T., Dong D., Zhang Y. Using Biochar and Coal as the Electrode Material for Supercapacitor Applications. Frontiers in Energy Research, 2020, vol. 7, art. 159.
  17. Laimon M., Mai T., Goh S., Yusaf T. Energy sector development: System dynamics analysis. Applied Sciences, 2020, vol. 10, art. 134. doi: 10.3390/app10010134.

Article full text

Download PDF