International Scientific Journals
of Scientific Technical Union of Mechanical Engineering "Industry 4.0"

The La-doped powder-form ZnO samples were prepared by impregnation using appropriate amounts of aqueous solutions of La(NO₃)₃. The non-impregnated and impregnated zinc oxide materials were then thermally treated at different temperatures – 350^oC and 450^oC in air atmosphere. The phase composition and structure of the obtained catalysts were characterized by powder X-ray diffraction analysis (PXRD), EPR and X-ray photoelectron spectroscopy. The PXRD results gave evidence that the average crystallite size of nanosized ZnO phase was varying within the range of 10-14 nm. The present work was focused on the influence of La doping and calcination temperatures on the photocatalytic activities of zinc oxide samples in the reaction of oxidative degradation of industrial textile azo dye Reactive Black 5 (RB5) under UV-light irradiation. The photocatalytic activity tests showed that the La doped ZnO photocatalysts are superior to the non-doped samples and are applicable to decontamination of the textile waste waters.

New type of photocatalyst containing copper oxide hydrate crystalline phase and additional amount of copper sulfate 2+ hydroxide was prepared by thermal decomposition of copper sulfate. The EPR detected presence of Cu ions. Photocatalytic degradation of two different model pollutants Reactive Black 5 (RB5) and Malachite Green (MG) in aqueous solution under UV illumination was investigated. The copper oxide containing catalyst showed four times higher photocatalytic activty with respect to RB5 than that to MG dye.

The catalyst exhibited much higher adsorption capacity to RB5 than to MG dye. The degree of degradation of MG dye is 18%, rate constant is 1.7х10 ^-3 min^-1 while the degree of degradation of RB5 dye is 90%, rate constant is 8х10^-3 min^-1 after 2 hours of illumination.