Semi-automatic MAG welding of alloyed machine-building steels
- 1 Technical University of Varna, Department of Materials Science and Technology, Varna, Bulgaria
- 2 Technical University of Varna, Department Thermal Engineering, Varna, Bulgaria
Abstract
The present study explores the possibility of semi-automatic MAG welding of three steels with carbon equivalents of 0,40%, 0,50% and 0,60%. The impact of the welding speed on the crack formation is determined by a structural analysis of the TIZ (Thermal Impact Zone). A three-factor experiment was conducted to determine the impact of the factors on the obtained hardness in the TIZ. The regression equation was obtained and the isolines were outlined showing the impact of these factors
References
- G.A. Beltschuk, K.M. Gatovskii, B.A. Koch, Svarka Sudovich konstrukciy., Sudostroenie, Leningrad, (1980)
- Prospekt, ELEKTRODI–AD, IHTIMAN,(2002÷2003)
- Short Product Catalog Welding Supplies, ESAB, September (2010)
- M. Konsulova-Bakalova, G. Vassilev, Aplication of Solidworks Simulation for Design of cooling system for injection molding, IX International congress „Machines Technologies Materials―19-21 septembyr 2012, Varna, Volume 1: Section Technologies, стр.31-34 (2012)
- E. Lefterov, M. Bakalova, Modeling of contact phenomena in the cutting zone at machining og holes, Academic Journal of Manufacturing Engineering, Vol.11, Issue 3, ISSN 1583- 7904, p. 114-119 (2013)
- A. Stoyanova, Determination of the influence of the type of electrodes coating on their technological characteristics., Machine Tools and Technologies, NTS, TU-Varna, Issue 1, ISSN 1312-0859, p.49-53. (2015)
- A. Stoyanova, Determination of structure of low carbon samples built-up welded with ABRADUR65., Machine Tools and Technologies, NTS, TU-Varna, Issue 1, ISSN 1312-0859, p.71-75. (2016)
- I. Bakalov, "Methods and instruments for measuring torque and speed of marine diesel engines"., Machines Technologies Materials – Issue 7., ISSN 1313-0226., p. 26 – 28 (2014)
- I. Bakalov, ―A testing station for studying the combustion of fuel with mechanical centrifugal and rotating cup burners‖., Machines Technologies Materials – Issue 8 ISSN 1313-0226., p. 11 – 13 (2015)
- Z. D. Kolev, S. Y. Kadirova, T. R. Nenov, Research of reversible heat pump installation for greenhouse heating. INMATEH - Agricultural Engineering, No2, pp. 77-84, ISSN 2068 – 2239,(SJR rank: 0.19) (2017)
- D. Spasova, Production of moulded metal composites (MMCs) with fiber reinforcing phase of the "in vitro" type, Month of Science – Varna., (2017)
- D. Spasova, N. Atanasov, R. Radev, ―Investigation of the interaction between the CuZn38Pb2 matrix and the Fe reinforcement phase during the production of the complex relief MMCs‖, Prace Instytutu Odlewnictwa, Vol. 57, no. 4, ISSN: 1899 – 2439., p.315—319 (2017)