Machines. Technologies. Materials.
Vol. 19 (2025), Issue 11, pg(s) 436-438

TECHNOLOGIES

Profiles containing a hole with a triangular cross-section and their application in welding technology

  • 1 IMSETCHA-BAS

Abstract

Pipe products with a triangular cross-section of the hole have been manufactured. These products have found effective application in welding equipment for the manufacture of contact current-carrying nozzles, guide tips, etc., used in welding in a protective gas environment and in submerged arc welding. In addition, the qualities of the nozzles have been studied in laboratory and production conditions on the basis of manufactured pilot batches. The conducted studies of the quality characteristics of the new class of nozzles showed that those with a triangular cross-section of the hole guarantee increased quality of the welding process and the weld seam, as their service life is 30%÷60% longer compared to the durability of conventional nozzles with a round hole.

Keywords

References

  1. Krastev B., Tool and technological scheme for manufacturing blanks for pressing containing holes with non-circular cross-section, Report at the Sixth National Conference with International Participation "Metallurgy, Hydro- and Aerodynamics, National Security" 2017, 29-30.05.2017, Sofia;
  2. Ivanov B., B. Paunov, T. Balevski, B. Krastev, Tool for two-step (discrete) extrusionр Report at the Sixth National Conference with International Participation "Metallurgy, Hydro- and Aerodynamics, National Security" 2017, 29-30.05.2017, Sofia;
  3. Paunov B., B. Ivanov, T. Balevski, Device for plastic processing of materials, reg. N 51829 of 24.04.1981;
  4. Ivanov B., B. Paunov, T. Balevski, St. Minkovski, Twostage pressing device, reg. N 56230 / 23.09.1983;
  5. Ivanov B., B. Paunov, T. Balevski, St. Minkovski, Twostage extrusion method, reg. N 59181 of 28.04.1984;
  6. Minkovski S. Hr., Mandrel-free pressing of pipes, Dissertation, 1982;
  7. Ivanov B., B. Paunov, T. Balevski, St. Minkovski, Macroand microgeometry of mandrel-free pipes, obtained under the conditions of discrete extrusion , Anniversary Conference of the CMI with international participation, 1981;
  8. Balevski T., St. Minkovski, B. Paunov, B. Ivanov, Study of the process of mandrel-free pressing of pipes, “Mechanical Engineering”, 3, 1980;
  9. Kortenski H., B. Ivanov, B. Paunov, T. Balevski, Method for mandrel-free pressing of pipes, Materials Science and Technology, 5, 1977;
  10. Kortenski H., T. Balevski, B. Paunov, B. Ivanov, S. Dimov, St. Minkovski, Method for pressing profiles with longitudinal cavities, reg. N 46173, X.1980, author's note N 29800.

Article full text

Download PDF