Industry 4.0
Vol. 8 (2023), Issue 5, pg(s) 155-158

DOMINANT TECHNOLOGIES IN “INDUSTRY 4.0”

Testing of Innovative Composite Wall/Ceiling Panel

  • 1 Palijan d.o.o., Zagreb, Croatia
  • 2 University of Rijeka, Faculty of Civil Engineering, Rijeka, Croatia

Abstract

The company Tehnoplast profili d.o.o. from Zagreb, in cooperation with the Faculty of Civil Engineering University of Rijeka and the company Palijan d.o.o. from Zagreb, is conducting a scientific research project dealing with buildings of near-zero energy produced in an industrial way. The construction system of these buildings consists of ceiling and wall panels, which are integrated into the building’s construction system. The structural wall/ceiling panels consist of external gypsum-fibreboard, thin-walled steel structure in the panel core and polymer foam in between. To enable the practical application of the innovative wall/ceiling panel system as a load-bearing structural element, the design model based on the comprehensive experimental and numerical investigation must be defined. In the research presented in this paper the performance of the composite wall/ceiling panels and the steel core wall/ceiling structure during out-of-plane to failure tests is shown.

Keywords

References

  1. Zuo, J. et al. Green building evaluation from a life-cycle perspective in Australia: a critical review Renew. Sustain. Energy Rev. 70, 358-368 (2017)
  2. Eltayeb, E., et al. Composite walls Composed of profiled steel skin and foam rubberized concrete subjected to eccentric compressions, Journal of Building Engineering, 46, 103715 (2022) https://doi.org/10.1016/j.jobe.2021.103715.
  3. Yi, O. et al. Case Study of the Structural Performance of Composite Slabs with Low Strength CRC Delivered by Concrete Truck, Case Studies in Construction Materials, 13, e00453 (2020) , https://doi.org/10.1016/j.cscm.2020.e00453
  4. Samali, B., Nemati, S., Sharafi, P., Tahmoorian, F., Sanati, F. Structural Performance of Polyurethane Foam-Filled Building Composite Panels: A State-Of-The-Art. J. Compos. Sci. 3, 40 (2019) https://doi.org/10.3390/jcs3020040
  5. Krolo, P., Bakran, A., Lukačević, L., Bede Odorčić, N., Palijan, I., Prlić, T., Bulić, M. Istraživanje ponašanja komponenti kompozitnog panela s integriranom čeličnom jezgrom. Zbornik radova (GraĎevinski fakultet Sveučilišta u Rijeci), 25 (1), 221-236 (2022) doi:10.32762/zr.25.1.14.
  6. Bakran, A., Krolo, P. & Lukačević, L. Experimental Determination of Shear Modulus of Polyurethane Foam Using Two Test Procedures. U: Skozrit, I., Sorić, J. & Tonković, Z. (ur.)10 th ICCSM International Congress of Croatian Society of Mechanics Book of Abstract. (2022)
  7. Krolo, P., Bakran, A., Lukačević, L., Grandić, D., Palijan, I., Prlić, T., Bede, N., Štimac Grandić, I., Šćulac, P. & Bulić, M. Experimental study of innovative building panel system, U: Balac, M., Dragicevic, A. & Mladenovic, G. (ur.) International Conference of Experimental and Numerical Investigations and New Technologies CNN TECH 2022 - Programme and The Book of Abstracts. (2022)
  8. Bede, N., Krolo, P., Grandić, D. & Palijan, I. Ponašanje magnezij-oksidnih kompozitnih ploča izloženih jednoosnom tlaku. U: Damjanović, D., Kozak, D., Konjatić, P. & Katinić, M. (ur.) Zbornik radova desetog susreta hrvatskog društva za mehaniku. (2020)
  9. Krolo, P., Bede, N., Grandić, D. & Palijan, I. Ponašanje magnezij-oksidnih kompozitnih ploča izloženih jednoosnom vlaku. U: Damjanović, D., Kozak, D., Konjatić, P. & Katinić, M. (ur.) Zbornik radova desetog susreta hrvatskog društva za mehaniku. (2020)
  10. Krolo, P., Bede, N. & Grandić, D., Palijan, I. Influence of density on tensile and compressive properties of polyurethane foam. U: Šajna, A., Legat, A., Jordan, S., Horvat, P., Kemperle, E., Dolenc, Sabina, Ljubešek, Metka & Michelizza, M. (ur.) Proceedings of the 2nd International Conference CoMS 2020/21. (2020)
  11. Lukačević, L., Krolo, P. & Bakran, A. Experimental Investigation of Face-to-Core Bond Strength between Gypsum Fibreboard and PU Test and measurement equipment setup Rigid Foam. U: Skozrit, I., Sorić, J. & Tonković, Z. (ur.)10th ICCSM International Congress of Croatian Society of Mechanics Book of Abstract. (2022)
  12. Bakran, A., Krolo, P. & Čeh, N. UtvrĎivanje svojstava prionjivosti izmeĎu čelika i polimerne pjene provedbom testa savijanja kompozitnog panela. U: Brčić, M., Skobla, A. & Ribarić, D. (ur.) Zbornik radova 11. susreta Hrvatskog društva za mehaniku. (2021)
  13. Lukačević, L., Krolo, P. & Čeh, N. Ispitivanje kompozitnog panela na savijanje s ciljem utvrĎivanja svojstva prionjivosti obloge i jezgre panela. U: Brčić, M., Skobla, A. & Ribarić, D. (ur.) Zbornik radova 11. susreta Hrvatskog društva za mehaniku. (2021)
  14. Bakran, A., Krolo, P. & Čeh, N. UtvrĎivanje svojstava prionjivosti izmeĎu čelika i polimerne pjene provedbom testa savijanja kompozitnog panela. U: Brčić, M., Skobla, A. & Ribarić, D. (ur.) Zbornik radova 11. susreta Hrvatskog društva za mehaniku. (2021)
  15. Lukačević, L., Krolo, P.; Bakran, A. Experimental Investigation of Novel Angle Bracket Connection in Cold-Formed Steel Structures, Buildings, 12(8); 1115, 17 (2022) doi:10.3390/buildings12081115
  16. HRN EN 10346:2015 Continuously hot-dip coated steel flat products for cold forming -- Technical delivery conditions (EN 10346:2015) Croatian standard institute, Zagreb, Croatia (2015)
  17. Izvještaj o ispitivanju panela (Laboratorij za konstrukcije, GraĎevinski fakultet u Rijeci, Rijeka 2022)

Article full text

Download PDF