International Scientific Journals
of Scientific Technical Union of Mechanical Engineering "Industry 4.0"

  • Journals
  • Submission
  • Events
  • About us
  • Contact

Author: Donetskaya Ju.

  • TECHNOLOGICAL BASIS OF “INDUSTRY 4.0”

    RULES FOR CHOOSING COMPONENTS OF A SINGLE DIGITAL PASSPORT FOR THE GENERATION OF CAD DESIGN SOLUTIONS

    • Donetskaya Ju.
    • Tihonova A.
    • Konovalov I.
    Industry 4.0, Vol. 5 (2020), Issue 1, pg(s) 14-15
    • Abstract
    • View Article
    •  Article PDF

    In previous articles, it was shown that for “Industry 4.0” production one of the important tasks is the collection, storage, analysis and processing of product data and related design and production procedures. This determines the implementation of PDM, ERP, MES and/ or EAM systems at enterprises and the construction of a metasystem based on them – a single digital passport. Its content allows to automate the generation of design decisions for timely management decisions, as well as to propose an approach to solve the problem of minimizing the impact of the human factor for the tasks of Industry 4.0. Therefore, the work presents the results of the development of the rules for choosing the components of a single digital passport for the generation of design solutions based on the principle of building a fuzzy Takagi-Sugeno-Kang network. The results obtained will allow to formulate a criterion for the similarity of the production object and the design and production procedure in the digital environment to the given requirements based on linear approximation methods.

  • Methods of generating design solutions for CAD electronic products based on a single digital passport

    • Donetskaya Ju.
    • Gatchin Yu.
    Industry 4.0, Vol. 4 (2019), Issue 3, pg(s) 110-112
    • Abstract
    • View Article
    •  Article PDF

    In this paper are considered various options for the interaction stages of the life cycle of an electronic product, initiated by the application for the development or supply of products, reclamation act or application for service. At the same time, variations of procedures and product data are formed, which form a digital passport and are used to generate several types of design solutions. It is shown that the content of a digital passport allows you to automate the procedure for obtaining design solutions, for which an appropriate methodology has been developed.

Congresses and conferences

  • VII International Scientific Conference
    "High Technologies. Business. Society"
    07.-10.03.2022 - Borovets, Bulgaria
  • XV International Conference for Young Researchers
    "Technical Sciences. Industrial Management"
    09.-12.03.2022 - Borovets, Bulgaria
  • XIX International Congress
    "Machinеs. Technolоgies. Materials"
    winter session
    09.-12.03.2022 - Borovets, Bulgaria
  • XXVIII International Scientific Technical Conference
    "Foundry"
    06.-08.04.2022 - Pleven, Bulgaria
  • X International Scientific Conference
    "Engineering. Technologies. Education. Safety"
    06.-09.06.2022 - Borovets, Bulgaria
  • XXX International Scientific Conference
    "trans&MOTAUTO"
    20.-23.06.2022 - Burgas, Bulgaria
  • VIII International Scientific Congress
    "Innovations"
    20.-23.06.2022 - Varna, Bulgaria
  • X International Scientific Congress
    "Agricultural Machinery"
    21.-25.06.2022 - Burgas, Bulgaria
  • VII International Scientific Conference
    "Industry 4.0"
    summer session
    22.-25.06.2022 - Varna, Bulgaria
  • VII International Scientific Conference
    "Conserving Soils and Water"
    24.-27.08.2022 - Borovets, Bulgaria
  • VIII International Scientific Conference
    "Materials Science. Non-Equilibrium Phase Transformations"
    05.-08.09.2022 - Varna, Bulgaria
  • XVII International Congress
    "Machines. Technologies. Materials"
    summer session
    07.-10.09.2022 - Varna, Bulgaria
  • VI International Scientific Conference on Security
    "Confsec"
    05.-08.12.2022 - Borovets, Bulgaria
  • VII International Scientific Conference
    "Industry 4.0"
    winter session
    07.-10.12.2022 - Borovets, Bulgaria
  • VI International Scientific Conference
    "Mathematical Modeling"
    07.-10.12.2022 - Borovets, Bulgaria

Scientific Technical Union of Mechanical Engineering "Industry-4.0"

108, Rakovski Str., 1000 Sofia, Bulgaria
tel. (+359 2) 987 72 90, tel./fax (+359 2) 986 22 40,
office@stumejournals.com