International Scientific Journals
of Scientific Technical Union of Mechanical Engineering "Industry 4.0"

  • Journals
  • Submission
  • Events
  • About us
  • Contact

Author: Narizhna T.

  • MATERIALS

    Influence of the rate of cooling on the formation of non-equilibrium eutectics in preeutectic alloys of the AL-SI system

    • Donii O.
    • Khristenko V.
    • Kotliar S.
    • Narizhna T.
    Machines. Technologies. Materials., Vol. 15 (2021), Issue 8, pg(s) 331-333
    • Abstract
    • View Article
    •  Article PDF

    Computer experiments were carried out with a simulation model of alloy crystallization in this work. The model was preliminarily calibrated for alloys of the Al-Si system. The presence of a non-equilibrium eutectic in pre-eutectic alloys with a silicon content of 1.0% – 1.6% has been detected. The minimum cooling rates at which the formation of an eutectic in these alloys is possible have been determined.

  • Influence of the external magnetic field on the structure and properties of the hypereutectic aluminum-silicon alloy

    • Donii O.
    • Narizhna T.
    • Voron M.
    • Berest D.
    Materials Science. Non-Equilibrium Phase Transformations., Vol. 4 (2018), Issue 3, pg(s) 79-82
    • Abstract
    • View Article
    •  Article PDF

    The effect of a constant magnetic field during the crystallization of a hypereutectic aluminum alloy on its structure in the solid state investigated. It is shown that the superposition of the magnetic field positively affects the structure of the alloy. A uniform distribution of the doped phases and eutectic in the volume of the alloy is observed. The phase of primary silicon significantly changes the size and the shape. It is established that the influence of an external magnetic field reduces the dimensions of the shrinkage defects. In general, the effect of an external magnetic field on the structure of the alloy leads to an improvement in the operational properties. The obtained measurement results showed more stable hardness values over the cross section of the sample in comparison with the alloy that was not processed.

Congresses and conferences

  • VII International Scientific Conference
    "High Technologies. Business. Society"
    07.-10.03.2022 - Borovets, Bulgaria
  • XV International Conference for Young Researchers
    "Technical Sciences. Industrial Management"
    09.-12.03.2022 - Borovets, Bulgaria
  • XIX International Congress
    "Machinеs. Technolоgies. Materials"
    winter session
    09.-12.03.2022 - Borovets, Bulgaria
  • XXVIII International Scientific Technical Conference
    "Foundry"
    06.-08.04.2022 - Pleven, Bulgaria
  • X International Scientific Conference
    "Engineering. Technologies. Education. Safety"
    06.-09.06.2022 - Borovets, Bulgaria
  • XXX International Scientific Conference
    "trans&MOTAUTO"
    20.-23.06.2022 - Burgas, Bulgaria
  • VIII International Scientific Congress
    "Innovations"
    20.-23.06.2022 - Varna, Bulgaria
  • X International Scientific Congress
    "Agricultural Machinery"
    21.-25.06.2022 - Burgas, Bulgaria
  • VII International Scientific Conference
    "Industry 4.0"
    summer session
    22.-25.06.2022 - Varna, Bulgaria
  • VII International Scientific Conference
    "Conserving Soils and Water"
    24.-27.08.2022 - Borovets, Bulgaria
  • VIII International Scientific Conference
    "Materials Science. Non-Equilibrium Phase Transformations"
    05.-08.09.2022 - Varna, Bulgaria
  • XVII International Congress
    "Machines. Technologies. Materials"
    summer session
    07.-10.09.2022 - Varna, Bulgaria
  • VI International Scientific Conference on Security
    "Confsec"
    05.-08.12.2022 - Borovets, Bulgaria
  • VII International Scientific Conference
    "Industry 4.0"
    winter session
    07.-10.12.2022 - Borovets, Bulgaria
  • VI International Scientific Conference
    "Mathematical Modeling"
    07.-10.12.2022 - Borovets, Bulgaria

Scientific Technical Union of Mechanical Engineering "Industry-4.0"

108, Rakovski Str., 1000 Sofia, Bulgaria
tel. (+359 2) 987 72 90, tel./fax (+359 2) 986 22 40,
office@stumejournals.com