International Scientific Journals
of Scientific Technical Union of Mechanical Engineering "Industry 4.0"

It was found that in the process of pulsed laser action, various phase and structural transformations occur in non -metallic inclusions, which take place under nonequilibrium conditions. It is shown that the melting of inclusions under laser action is corresponded with change of their structure and phase composition. Also it is shown that the nature of these transformations depends on the type of nonmetallic inclusion. It was found that nonequilibrium phase transformations contribute to a change in the structure, phase composition, properties and sizes of nonmetallic inclusions, as well as the inclusion-matrix interphase boundaries of steel. It is shown that changes in the structure and properties of non-metallic inclusions affect their behavior and the formation of defects in the laser-strengthened layer of steel
products.

Melting and crystallization of heterophase non-metallic inclusions “dispersed phases are in non-metallic matrix” was investigated. Mechanism of melting of the inclusions “dispersed phases are in non-metallic matrix” and inclusion-matrix boundaries under contact laser melting with steel matrix in the conditions of abnormal mass transfer connecting with formation of zones with high dislocation density and also with electron and electro-magnetic interaction between inclusion and steel matrix was proposed. That allows to create the possibilities for the influence on the inclusion-matrix boundaries and also on the chemical and phase composition of surface layer of non-metallic inclusions “dispersed phases are in non-metallic matrix”. Peculiarities of structure of non-metallic inclusions after speed crystallization were investigated. It was shown that under laser action the initial structure of inclusion-steel matrix boundaries transits into unstable equilibrium high-energy condition that cause development of the dissipation processes connecting with aspiration of system inclusionmatrix to the state with minimum of the free energy. In the result of the system inclusion-matrix transits to the state of unstable equilibrium which determines structure and properties of laser-quenched interphase boundary. Processes of melting, fusion and dissolution of nonmetallic inclusions “dispersed phases are in non-metallic matrix” and also of the melting of steel matrix play the great role in transformation of interphase inclusion-matrix boundaries under laser action.

Some wheel steels inclined for the self-quenching on bainite structure were produced and investigated after hot deformation and heat strengthening. Steels contained 0,12…0,45% of carbon, and also Si, Mn, Mo, Cr, Ni, V, Ti, Al. Steels with bainite structure after hot deformation and tempering were investigated. It was shown the possibility of the railway wheels production with bainite structure and hardness of 400HB without heat strengthening treatment. The results of investigation shown the possibility of railway wheels production with bainite structure, hardness of 400 HB and high complex of the mechanical and operating properties without heat strengthening treatment. These tasks solved owning to application of new wheel steels and up-to-date technology.