LABORATORY AND FIELD EQUIPMENT WORKINGOUT AND THE RESULTS OF EXPERIMENTAL STUDIES OF PRE- HARVESTING SUGAR BEET FIELD CONDITIONS
- 1 National Scientific Centre “Institute for Agricultural Engineering and Electrification ” NAASU, Ukraine
- 2 National University of Life and Environmental Sciences, Ukraine
- 3 Slovak University of Agriculture in Nitra, Slovak Republic
- 4 Podolsky State Agricultural and Technical University, Ukraine
- 5 Tavria State Agrotechnological University, Ukraine
Described in the scientific literature the results of experimental studies and performance test of the technological process of sugar beet harvesting conducted in recent years have shown that modern sugar-beet harvesters manufactured in Europe and America work with significant losses of sugar-bearing plant materials. These losses are due to generally poor topping quality of sugar beet on a root. Therefore, nowadays the search of technical solutions enabling to avoid these losses is of great to importance as it increases the yield of sugar-bearing plant materials per hectare of crops. The purpose of research is to reduce the losses of sugar-bearing plant materials in the course of separation process of sugar beet tops from heads of root crops on a root. While conducting research the methods of field experimental research on the measurement of physical parameters of the technological process were used, as well as methods of statistical processing of the measurement results with the use of computer. New experimental equipment was designed for the field experimental studies being equipped with modern electronic equipment with data transfer to a PC. As a result of the experimental investigation of the distribution heads heights above the ground of sugar beet roots confirmation has been received hypothesis that it does not deny the law of the normal distribution. The results of the multiple measurements enabled set limits of changes in their statistical characteristics, which are as follows: average statistical deviation σ = 20 … 30 mm, the expectation m = 40 … 60 mm. A new design of the laboratory equipment and results of the experimental studies, conducted on it, have given every reason to design and develop a new system of automatic adjustment of the height of cut tops, which can be used in designs of modern sugar-beet harvesting machines.