International Scientific Journals
of Scientific Technical Union of Mechanical Engineering "Industry 4.0"

  • Journals
  • Submission
  • Events
  • About us
  • Contact

Author: Charniak I.N.

  • Sprayed bronze and aluminum powders for restoring worn-out surfaces using gas-flame spraying

    • Ilyushchanka A.
    • Kusin R.A.
    • Charniak I.N.
    • Kusin А.R.
    • Manoilo Y.D.
    • Semenov V.I.
    Machines. Technologies. Materials., Vol. 12 (2018), Issue 12, pg(s) 517-519
    • Abstract
    • View Article
    •  Article PDF

    The information is given about small-sized equipment for producing sprayed powders of alloys based on copper and aluminum, intended for strengthening new and restoring worn-out surfaces by applying a gas-flame coating, as well as for the protection of parts against corrosion, process modes and powder properties. The high quality of the coatings obtained with the use of manufactured powders has been confirmed.

  • Aeriation of culture media with powder dispersers when cultivating yeast cultures during milk whey processing

    • Ilyushchanka A.F.
    • Charniak I.N.
    • Kusin R.A.
    • Yakimovich N.N.
    • Shunkevich A.
    Industry 4.0, Vol. 4 (2019), Issue 1, pg(s) 32-34
    • Abstract
    • View Article
    •  Article PDF

    The characteristics and structure of aerators based on titanium powders have been given, as well as the information about the effectiveness of their application when cultivating yeast cultures during milk whey processing.

  • PRODUCTION PROCESS OF POWDER PERMEABLE MATERIALS MADE OF SPHERICAL BRONZE POWDERS BY PRESSING

    • Ilyushchanka A.
    • Kusin R.A.
    • Charniak I.N.
    • Kusin A.R.
    • Zhehzdryn D.I.
    Machines. Technologies. Materials., Vol. 12 (2018), Issue 7, pg(s) 287-290
    • Abstract
    • View Article
    •  Article PDF

    The process of producing powder permeable materials made of spherical bronze powders by tin-phosphorous pressing method has been investigated. A technique for producing experimental samples based on the granulation of powders by a pore-former has been described. The technology is simple to carry out and it does not require complex equipment. Products have a satisfactory set of properties.

Congresses and conferences

  • III International Scientific Conference on Security
    "Confsec"
    09.-12.12.2019 - Borovets, Bulgaria
  • III International Scientific Conference
    "Industry 4.0"
    winter session
    12.-15.12.2019 - Borovets, Bulgaria
  • II International Scientific Conference
    "Mathematical Modeling"
    12.-15.12.2019 - Borovets, Bulgaria
  • V International Scientific Conference
    "High Technologies. Business. Society"
    09.-12.03.2020 - Borovets, Bulgaria
  • XIII International Conference for Young Researchers
    "Technical Sciences. Industrial Management"
    11.-14.03.2020 - Borovets, Bulgaria
  • XVII International Congress
    "Machinеs. Technolоgies. Materials"
    winter session
    11.-14.03.2020 - Borovets, Bulgaria
  • XXVII International Scientific Technical Conference
    "Foundry"
    08.-10.04.2020 - Pleven, Bulgaria
  • VIII International Scientific Conference
    "Engineering. Technologies. Education. Safety"
    08.-11.06.2020 - Veliko Tarnovo, Bulgaria
  • VII International BAPT Conference
    "Power Transmissions"
    10.-13.06.2020 - Varna, Bulgaria
  • XXVIII International Scientific Conference
    "trans&MOTAUTO"
    20.-25.06.2020 - Burgas, Bulgaria
  • VI International Scientific Congress
    "Innovations"
    22.-25.06.2020 - Varna, Bulgaria
  • V International Scientific Conference
    "Industry 4.0"
    summer session
    24.-27.06.2020 - Varna, Bulgaria
  • VIII International Scientific Congress
    "Agricultural Machinery"
    24.-27.06.2020 - Burgas, Bulgaria
  • V International Scientific Conference
    "Conserving Soils and Water"
    26.-29.08.2020 - Burgas, Bulgaria
  • VI International Scientific Conference
    "Materials Science. Non-Equilibrium Phase Transformations"
    07.-10.09.2020 - Varna, Bulgaria
  • XVII International Congress
    "Machines. Technologies. Materials"
    summer session
    09.-12.09.2020 - Varna, Bulgaria

Scientific Technical Union of Mechanical Engineering "Industry-4.0"

108, Rakovski Str., 1000 Sofia, Bulgaria
tel. (+359 2) 987 72 90, tel./fax (+359 2) 986 22 40,
office@stumejournals.com