Industry 4.0
Vol. 9 (2024), Issue 5, pg(s) 182-185

DOMINANT TECHNOLOGIES IN “INDUSTRY 4.0”

Mechanical Characterization of Al-Cu Materials Fabricated by Powder Metallurgy under Quasi-static and Dynamic Compressive Loadings

  • 1 Institute of Mechanics at Bulgarian Academy of Sciences, Bulgaria

Abstract

This study investigates the mechanical behaviour of Al10Cu materials fabricated through powder metallurgy and subjected to quasi-static and dynamic compressive loadings. The materials were sintered and tested under controlled conditions to evaluate their compressive strength. Quasi-static tests were performed at a constant strain rate of 0.003 s⁻ ¹, while dynamic tests were conducted at strain rates corresponding to impact speeds of about 10 m/s and 20 m/s. The results indicate that sintered Al10Cu materials are suitable for applications under high-strain impact loadings due to their high energy absorption. These findings highlight the potential of powdermetallurgy-derived Al10Cu alloys for applications requiring high strain rate performance, offering insight into their suitability for use in dynamic environments.

Keywords

References

  1. A. Wąsik, B. Leszczyńska Madej, P. Noga. The Int. J. of Adv. Man. Tech (2024) 134:3611–3620
  2. S. Jain, R.S Rana, P. Jain. Int. Res. J. of Eng. and Tech (2016), Vol: 03, Issue: 01
  3. M.N. Khan, S. Narayan, A. Rajeshkannan A.K. Jeevanantham. Materials Today: Proceedings 22 (2020) 2499–2508
  4. A. Wasik, B. Leszczynska-Madej, M.Madej, M. Goły. Materials (2023) 16, 5492.
  5. G.B. Schaffer, T.B. Sercombe, R.N. Lumley. Mater. Chem. Phys. (2001) 67, 85–91.
  6. K. Sang-Chul, K. Moon-Tae, L. Sungkyu, C, Hyungsik, A. Jae- Hwan. J. Mater. Sci. (2005) 40, 441–447.
  7. P. R. Matli, R. A. Shakoor, A. M. A. Mohamed, M. Gupta. Metals (2016) 6, 143
  8. K.N. Manjunath, G.B. Krishnappa. Materials Today: Proc. 5 (2018) 3019–3026
  9. R. S. Bonatti, A. D. Bortolozo, R. F. G. Baldo, E. Poloni, W. R. Osório. Metals (2023) 13, 1710
  10. S. LUO, Y. WU, B. CHEN, M. SONG, J. YI, B. GUO, Q. WANG, Y. YANG, W. LI, Z. YU. Trans. Nonferrous Met. Soc. China 32(2022) 3860−3872
  11. R. Ali, F. Ali, A. Zahoor, R. N. Shahida, N. H. Tariq, T. He, M. Shahzad, Z. Asghar, A. Shah, A. Mahmood, H. B. Awais. J. of Alloys and Comp. 889 (2021) 161531
  12. O. Emadinia, M. T. Vieira, M. F. Vieira. Met. 2020, 10, 1416
  13. P. R. Matli, U. Fareeha, R. A. Shakoor, A. M. A. Mohamed. J. Mater Res. Technol. (2018) 7(2):165–172.
  14. R. Malik, P. A. Bajakke, K. K. Saxena, A. Lakshmikanthan, A. S. Deshpande, S. Mabuwa, V. Masomi. Mater. Res. Express 9 (2022) 066507
  15. K. S.M. Sonti, B. Dash, K.V. Vamsi, H. Bandyopadhyay, B. Ravisankar, K. Sivaprasad, S. Karthikeyan. J. of All. and Comp. 873 (2021) 159767
  16. A. Joseph, V. Gauthier-Brunet, A. Joulain, J. Bonneville, S. Dubois, J-P. Monchoux, F. Pailloux. Mat. Char. 145 (2018) 644–652
  17. H.K. C. Mohan, S. Devaraj, K.S. N. Swamy. J. of Mat. Eng. and Perf. (2021) 30:2433–2438
  18. D. Kim, K. Kim, H. Kwon. Materials (2021), 14, 266.
  19. M. N. Khan, S. Narayan, A. Rajeshkannan. AIMS Mat. Sci. (2019) 6(3): 441–453.
  20. X. Tang, Z. Wang, J. Yin, J. Yi. Adv. in Mat. Sci. and Eng. 2021, Article ID 5518172, 9 pages
  21. M. Guden,T, E. Celik, E. Akar, S. Cetiner. Materials Characterization 54 (2005) 399– 408
  22. R. Krastev, V. Kavardzhikov, T. Simeonova. Math. Modeling (2024), Vol. 8 (to be published)

Article full text

Download PDF