INNOVATIVE SOLUTIONS

Study of the power interaction of a movable block composed of two boring tools with the elements of the technological system

  • 1 University of Rousse “Angel Kanchev”, Department “Mechanical and manufacturing engineering”, Rousse, Bulgaria

Abstract

SYSTEMIn the paper is analyzed the dynamics of a movable block, consist of two boring tool with oppositely positioned cutting inserts, applied as a cutting part of tools for combined machining of deep holes by cutting and surface plastic deformation. Tribo-mechanical and force dependencies were derived, connecting the geometry of the cutting inserts and the friction forces in the contact surfaces of the block with its working capacity.

Keywords

References

  1. Аврамова, Т. Г., Стефанов, Г. Д., Комбинирани инструменти за ППД с радиално подаване, Сборник доклади от XXVII международна научно-техническа конференция, АДП Созопол, Брой 3/224, ТУСофия, (2018), стр. 48 – 52, ISSN 1310-3946.
  2. Avramova T.G., Lefterov E.L., Regarding the strength calculations of complex combined tools, International Conference - Modern Technologies inIndustrial Engineering (ModTech) 2018, IOP Conference Series: Materials Science and Engineering, ModTech 2018, Vol. 400, 022005 (2018), pp. 1-7, E-ISSN:1757-899X, doi:10.1088/1757- 899X/400/2/022005.
  3. Avramova T.G., Lefterov E.L., Machining of Internal Cylindrical Surfaces with Adjustable Tool, 12 International Conference Interdisciplinarity in Engineering INTER-ENG 2018 - Tîrgu-Mureș, Elsevier's Procedia Manufacturing Journal, Vol. 32, (2019), ISSN: 2351- 9789, pp. 29-35, https://doi.org/10.1016/j.promfg.2019.02.179.
  4. Avramova T., Tool for Machining of Blind Conical Holes by Surface Plastic Deformation, International Journal of Advancementsin Mechanical and Aeronautical Engineering, Volume 5, Issue 2 (2018), pp.33-35, Electronic ISSN: 2372-4153.
  5. Avramova T.G., Some Aspects Of Designing Cutting Tools, Eastern Academic Journal, Issue 1 (2018), pp. 79-85, ISSN: 2367-7384.
  6. Георгиева Н., С. Костадинов, В. Костадинов, М. Кършаков. Определяне основните конструктивни параметри на деформиращата част на инструменти за комбинирано обработване на отвори чрез рязане и ППД. Сб. доклади АДП 2010, Созопол, стр. 164-171, ISSN 1310-3946.
  7. Кършаков М. Теоретично изследване поведението на подвижен двуножов блок с осово разместени прави режещи ръбове. Сб. доклади на ТЕХСИС 2009, Пловдив, 2009, с. 59-64, ISSN 1310-271.
  8. Кършаков М. Кинематично поведение на подвижен двуножов блок за разстъргване при врязване на пластини с прави и кръгли режещи ръбове. Сп. „Машиностроене и машинознание, Варна, юни, 2009, (Бакаджици), ISSN 1312-8612.
  9. Кършаков М. Период на установено рязане с подвижен двуножов блок с прави и кръгли режещи ръбове. Сб. доклади на ТЕХСИС 2009, Пловдив, 2009, с. 77-82, ISSN 1310-271.
  10. Петров П., Комбинирано обработване на дълбоки отвори чрез рязане и повърхностно пластично деформиране. Дисертация, Русе, септември, 2015.

Article full text

Download PDF