Machines. Technologies. Materials.
Vol. 14 (2020), Issue 1, pg(s) 3-11

MACHINES

On intensifying the research processes of regular motions transformation

  • 1 Institute of Mechanics, Bulgarian Academy of Sciences, Bulgaria
  • 2 Graduate School of Engineering Science, Akita University, Japan

Abstract

The study is a review of the scientific and applied content of the research carried out over the years on the topic, both worldwide and by the authors. The research is structured in a way that presents the topic in its active development over the years, which substantially proves its permanent relevance. The development of the researches of the spatial transformation of motions, oriented towards the synthesis and analysis of spatial transmissions with innovative characteristics, at this stage and up to the present moment for Bulgaria are realized exclusively at the Institute of Mechanics at Bulgarian Academy of Sciences (BAS). The content of the researches carried out at the Bulgarian Academy of Sciences clearly determines their market orientation and, therefore, their place of development was in the “Centre of competence MIRACle – Mechatronics, Innovation, Robotics, Automation, Clean Technologies” at the Institute of Mechanics. The above said makes it inexplicable the decision of the former management of the institute, in the face of Prof. Vasil Kavardjikov (Director) and Assoc. Detelina Ignatova (Project Manager), to ignore this topic when designing a project for the creation of the Competence Centre.

Keywords

References

  1. Abadjiev, V. Gearing Theory and Technical Applications of Hyperboloid Drives, Sc. D. Thesis, Institute of Mechanics, Bulgarian Academy of Sciences, Sofia, 2007, 309 p. (in Bulgarian)
  2. Abadjieva, E. Mathematical Models of the Kinematic Processes in Spatial Rack Mechanisms and Their Application, Ph. D Thesis, Institute of Mechanics, Bulgarian Academy of Sciences, Sofia, 2010, 165 p. (in Bulgarian)
  3. Litvin, F. Theory of Gearing. Publishing house Nauka, Moscow, 1968, 584 p. (in Russian).
  4. Litvin, F. Theory of Gearing. NASA Reference Publication 1212, AVSCOM Technical Report 88-C-035, US Government Printing Office, Washington, 1989, 470 p.
  5. Litvin, F. Gearing Geometry and Applied Theory. PTR Prentice Hall, A Paramount Communication Company, Englewood Eliffs, New Jersey 07632, 1994, 724 p.
  6. Litvin, F., K. Petrov, V. Ganshin. The Effect of Geometrical Parameters of Hypoid and Spiroid Gears in Its Quality Characteristics. Transaction of ASME. Journal of Engineering for Industry, Volume 96, Series B, Number 1, February 1974, pp.330-334.
  7. Pismanik K. Hypoid Transmissions. Mashinostroenie, Moscow, 1964, 227 pp. (in Russian)
  8. Lopato, G., N. Kabatov, M. Segal. Bevel and Hypoid Gears with Circular Teeth. Handbook, Mashinostroenie, Moscow, 1977, p. 423. (in Russian)
  9. Minkov, K. Synthesis and Analysis of Semi-Conjugated Conic and Hypoid Gears. Ph. D. Thesis, LITMO, Leningrad, 1971, p. 170 (in Russian)
  10. Minkov, K., Fundamentals of the Synthesis of Primary Surfaces of the Transmissions with Arbitrary Crossed Axes. J. of Theoretical and Applied Mechanics, Book 3, Bulgarian Academy of Sciences, Sofia, 1975, pp. 61-74 (in Russian)
  11. Minkov, K. Elimination of Ordinary Contact Points in Gear Sets with Arbitrary Crossed Axes. Second National Congress of Theoretical and Applied Mechanics, Varna, 8-14.X.1973, vol. 1, Sofia, 1975, pp. 430-439. (in Bulgarian)
  12. Minkov, K. Mechanical and Mathematical Modeling of Hyperbolic Gears. Sc. D. Thesis, Sofia, 1986, 330 p. (in Bulgarian).
  13. Minkof –Petrof, K. Automated Technological Synthesis of Spatial Gearings. Proceedings of the Sixth World Congress on “The Theory of Machines and Mechanisms”, Volume II, December 15 – 20, 1983, Delhi, India, pp 807-810
  14. Minkov, K., V. Abadjiev, D. Petrova. Some Aspects of the Geometric and Technological Synthesis of Hypoid and Spiroid Gears. The Theory of Machines and Mechanisms. Proceedings. of 7th World Congress of IFToMM, 17-22 September 1987, Seville, Spain, Pergamon Press, Volume 3, pp. 1275-1278.
  15. Minkof, K. A New Approach to Basic Geometry and Classification of Non-orthogonal Gearing. Proceedings of the 1989 International Power Transmissions of the 90’s, Volume Two, Held in Chicago, Illinois, April 25-28, 1989, ASME, New York, N.Y. 10017, pp 593-598
  16. Bohle, F. Spiroid Gears. A New Development in Gears of the Skew-Axis Type. Machinery, Vol. 62, No 2, Chicago, 1955, pp. 155-161.
  17. Saari, O. The Mathematical Background of Spiroid Gears, Industrial Mathematical Series, № 7, Detroit, 1956,pp. 131-144.
  18. Nelson, W. Spiroid Gearing. Part 1 – Basic Design Practices. Machine Design, 16 February 1961, pp. 136-144.
  19. Nelson, W. Spiroid Gearing. Part 2 – Durability, Strength and Efficiency. Machine Design, 2 March 1961, pp. 93-100.
  20. Nelson, W. Spiroid Gearing. Part 3 – Materials, Mounting Detail, lubrication. Machine Design, 16 March 1961, pp. 165-171.
  21. A. Georgiev. Elements of Geometric Theory and Some Issues of the Design and Production of Hypoid - Worm Gears. Ph. D. Thesis, Izhevsk, 160p, (1965), (in Russian).
  22. Georgiev, A., V. Goldfarb. Aspects of Geometric Theory and Results of the Study on Spiroid Gears with Cylindrical Worms. Mechanics of machines. Issue 31-32, Nauka Publishing House, Moscow, 1972, pp. 70-80. (in Russian)
  23. Georgiev, A., V. Goldfarb. To the Study of Orthogonal Spiroid Gears with a Cylindrical Worm Having Threads With Ideally-Variable Pitch. Mechanics of Machines, Issue 45, Nauka Publishing House, Moscow, 1974, pp. 91-99. (in Russian)
  24. Georgiev, A., V. Goldfarb. On Node Lines of Mesh in Orthogonal Spiroid Gears with Convex-Concave Threads Profile of the Cylindrical Worm. Problems of Research, Design and Production of Gears. Summary of Reports to the 5th National Conference (October 1-5, 1974), Khabarovsk, 1974, pp. 114-119.(in Russian)
  25. Georgiev, A., V. Goldfarb, A. Kunver, Determination of the Longitudinal Line and the Undercutting of the Teeth of an Orthogonal Spiroid Drive with a Cylindrical Worm Having a Convex Threads Profile. Mechanical Transmissions, Collected Articles, Issue 7, Izhevsk, 3-7, (1975), (in Russian).
  26. Georgiev, A., R. Samigullin, I. Kotova. Development of the Improved Designs of Spiroid and Helical-Spiroid Gear Units. International Conference “Power Transmissions’03”, 11-13 September 2003, Varna, Bulgaria, Proceedings, Vol. 1, NSBN954-90272-9-5, 2003, pp. 112-116.
  27. Georgiev, A., S. Ezerskaja, A. Bochkarev. Some Results of SZ-2 Type Spiroid Gears Investigation. International Conference “Power Transmissions’03”, 11-13 September 2003, Varna, Bulgaria, Proceedings, Vol. 1, NSBN954-90272-9-5, 2003, pp. 150-156.
  28. Goldfarb, V. I. Nesimov. Applications of Interpolation Methods in the Study of the Lateral Surfaces of the Teeth of the Spiroid Gear-Wheels. Mechanical Gear Transmissions. Intercollegiate Collection, Vol 2, Izhevsk, 1977, pp. 28-33(in Russian)
  29. Goldfarb, V. I. Nesmelov. Selection of Geometric Parameters of Non-Orthogonal Spiroid Transmissions. News of Higher Education Institutions. Mechanical Engineering, MVTU Edition. N.E. Bauman, No. 8, Moscow, 1981, pp. 48-51 (in Russian).
  30. Goldfarb, V. Fundamentals of the Theory of Automatic Geometric Analysis and Synthesis of Worm Gears of Common Type. Abstract of Sc. D. Thesis, Moscow Aviation Institute, Moscow, 1986, 32 p (in Russian).
  31. Goldfarb, V. Aspects of Gears and Reduction Drives Automated Design. Gearing and Transmissions, Izhevsk, Assoc. Engineers, 1991, No 1, 20-24 (in Russian).
  32. Goldfarb, V. Possibilities of Computer Synthesis Scheme of Hyperboloid Gears. Mechanics of Machines, Vol. 1, No 5, Publishing House of High Institute of Mechanical Engineering - Varna, Varna, 1994, pp. 80-83 (in Russian).
  33. Goldfarb, V., N. Isakova. Variants of Spiroid Gearing from Pitch Realization Point of View. Gearing and Transmissions, No 1, Izhevsk-Moscow, 1995, pp. 25-34.
  34. Lagutin, S. Synthesis of Spatial Gearings By Aid of Meshing Space. International Conference “Power Transmissions’03”, 11-13 September 2003, Varna, Bulgaria, Proceedings, Vol. 1, NSBN954-90272-9-5, 2003, pp. 343-346.
  35. Ganshin, V. Analytical and Experimental Study of Spiroid Drives with Involute Worm. Ph. D. Thesis, Ministry of Heavy Energy and Transport Engineering, TSINTMASH, Moscow, 1970, 161 p (in Russian).
  36. Ganshin, V. On the Synthesis of Involute Spiroid Transmissions. Mechanics of Machines, Issue 31-33, Nauka Publishing House, Moscow, 1972, pp. 50-53(in Russian)
  37. Schagerl, D. Helicon- und Spiroid- Getribe mit trapezformigem Schneckenprofil. Teil 1, INDUSTRIE – ANZEIGER 91. Jg. Nr 52, Munchen, 1969, pp. 24 -26 (in German).
  38. Schagerl, D. Helicon- und Spiroid- Getribe mit trapezformigem Schneckenprofil. Teil 2, INDUSTRIE – ANZEIGER 91. Jg. Nr 80, Munchen, 1969, pp. 1953 -1957 (in German).
  39. Dudas, I. Representation of Helicoid Surface in the CAD/CAM System. Gearing and Transmissions, No 1, Izhevsk-Moscow, 1995, pp. 52-56.
  40. Lagutin, S. Space of Gearing and its Elements. Mashinovedenie, No. 4, Nauka Publishing House, Moscow, 1987, pp. 69-75 (in Russian).
  41. Lagutin, S. Worm Gears with Closed Contact Lines. Mashinovedenie, No. 6, Nauka Publishing House, Moscow, 1970, pp. 41-46. (in Russian)
  42. Bernatsky, I., V. Rybakov. Determination of Ordinary Contact Nodes in a Cylindrical Worm Gears. Mechanics of Machines. Issue 31-32. Nauka Publishing House, Moscow, 1972, pp. 88-92 (in Russian).
  43. Korestelev, A., S. Lagutin. Synthesis of Gear Drives with Closed Contact Lines. Mashinovedenie, No. 6, Moscow, 1969, pp. 44-50 (in Russian)
  44. Abadjieva, E., V. Abadjiev, H. Kawazaki, T. Mouri. On the Synthesis of Hyperboloid Gears and Technical Application, Proceedings of the ASME 2013 International Power Transmission and Gearing Conference, Portland, Oregon, USA, 2013 (published on CD),
  45. Abadjiev, V., E Abadjieva. Geometric Pitch Configurations – Basic Primitives of the Mathematical Models for the Synthesis of Hyperboloid Gear Drives. Chapter 5; Advanced Gear Engineering, Mechanism and Machine Science 51, Springer International Publishing Switzerland, 2018, pp.91-117; (Chapter 5 in Advanced Gear Engineering, Mechanism and Machine Science, 24 Chapters, Volume 51)
  46. Abadjieva, E., V. Abadjiev, A. Naganawa. Miniature Device for Energy Conversion – Basic Building Elements of Mechatronics. Int. Sc. J. “Industry 4.0”, Published by Scientific Technical Union of Mechanical Engineering “Industry 4.0”, Year II, Issue 1/2017, Sofia, 2017, pp. 34-37.

Article full text

Download PDF