TECHNOLOGIES

Mechanical properties of parts fabricated with additive manufacturing: A review of mechanical properties of fused filament fabrication parts

  • 1 Ss. Cyril and Methodius University, Faculty of Mechanical Engineering, Skopje, North Macedonia
  • 2 Molior LTD., Skopje, North Macedonia

Abstract

Additive Manufacturing (AM) Technologies are in constant development since their emergence in the late 80s. However, standardization is still in its infancy, owing to the numerous changing variables in each process. One of the most common are the material extrusion process, in which thermoplastic is extruded, also known as fused filament fabrication (FFF). The popularity of this process is due to the relatively simple method as well as the relatively good mechanical properties of the fabricated parts. There are numerous research studies evaluating mechanical properties because the FFF process allows for the investigation of many variables and the production of many parts with a wide range of characteristics. But how good are those characteristics in reality, and how good do we need them to be? It all depends on the application for which those parts are required.

Keywords

References

  1. I. Gibson, D.W. Rosen, B. Stucker, M. Khorasani, D. Rosen, B. Stucker, & M. Khorasani. Additive manufacturing technologies. 17. Cham, Switzerland: Springer (2021)
  2. M. Bertoldi, M.A. Yardimci, C.M. Pistor, S.I. Guceri, & G. Sala. International Solid Freeform Fabrication Symposium (1998)
  3. A. Bellini, & S. Güçeri, Rapid Prototyping Journal (2003).
  4. S.-H. Ahn, M. Montero, D. Odell, S. Roundy, P.K. Wright, A. Rapid Prototyping Journal, 8(4) 248–257 (2002)
  5. Hossain, M.S., Espalin, D., Ramos, J., Perez, M. and Wicker, R. Journal of Manufacturing Science and Engineering, 136(6) 061002. (2014).
  6. A.K. Sood, R.K. Ohdar, S.S. Mahapatra, Mater. Des., 30, 4243–4252 (2009)
  7. A.K. Sood, R.K. Ohdar, S.S. Mahapatra, J. Adv. Res., 3, 81–90 (2012)
  8. Lee, C.S., Kim, S.G., Kim, H.J., Ahn, S.-H., J. Mater. Process. Technol. 187–188, 627–630. (2007)
  9. M. Uddin, M. Sidek, M. Faizal, R. Ghomashchi, A. Pramanik, Journal of Manufacturing Science and Engineering, Transactions of the ASME. 139(8) 081018 (2017)
  10. A.L. Slonov, A.A. Khashirov, A.A. Zhansitov, E.V. Rzhevskaya, & S.Y. Khashirova, Rapid Prototyping Journal (2018).
  11. O.S. Es-Said, J. Foyos, R. Noorani, M. Mendelson, R. Marloth, & B.A. Pregger, Materials and Manufacturing Processes, 15(1), 107-122 (2000)
  12. S. Raut, V.S. Jatti, N.K. Khedkar, & T.P. Singh, Procedia Materials Science. Elsevier B.V. 1625–1630 (2014)
  13. G.C. Onwubolu, & F. Rayegani, International Journal of Manufacturing Engineering, (2014)
  14. A.K. Sood, R.K. Ohdar, S.S. Mahapatra, Mater. Des., 31, 287–295 (2010).
  15. P. Shubham, A. Sikidar, T. Chand, Key Eng. Mater., 706, 63–67 (2016).
  16. S.H. Masood, K. Mau, and W.Q. Song, Materials Science Forum, Trans Tech Publications Ltd. 654, 2556-2559 (2010)
  17. Syamsuzzaman, M., Mardi, N.A., Fadzil, M. and Farazila, Y. Materials Research Innovations, 18(6), S6- 485 (2014).
  18. Rajpurohit, S. R., & Dave, H. K. Advances in Manufacturing, 6(4), 430-441. (2018).
  19. J. Torres, M. Cole, A. Owji, Z. DeMastry, A.P. Gordon, Rapid Prototyping Journal, 22(2), 387-404 (2016)
  20. G. Taylor, X. Wang, L. Mason, M.C. Leu, K. Chandrashekhara, T. Schniepp, & R. Jones, Rapid Prototyping Journal (2018)
  21. J.F. Rodríguez, J.P. Thomas, & J.E. Renaud, Rapid Prototyping Journal (2001)
  22. B.H. Lee, J. Abdullah, Z.A. Khan, Journal of Materials Processing Technology, 169, 54-61(2005)
  23. Q. Sun, G.M. Rizvi, C.T. Bellehumeur, P. Gu, Rapid Prototyping Journal, 14(2) 72–80 (2008)
  24. S.K. Panda, S. Padhee, A.K. Sood, S.S. Mahapatra, Intell. Inf. Manag., 1, 89–97 (2009)
  25. A.K. Sood, V. Chaturvedi, S. Datta, and S.S. Mahapatra, Journal of Advanced Manufacturing Systems, 10(2), 241-259 (2011)
  26. A. Bagsik, V. Schoeppner, ANTEC, Plastics: Annual Technical Conference Proceedings, (2011).
  27. A.W. Fatimatuzahraa, B. Farahaina, & W.A.Y. Yusoff, IEEE Symposium on Business, Engineering and Industrial Applications (ISBEIA), 22-27, (2011).
  28. D. Croccolo, M. De Agostinis, & G. Olmi, Computational Materials Science, 79, 506-518 (2013)
  29. J. Lee, and A. Huang, Rapid Prototyping Journal, 19(4), 291-299 (2013)
  30. C. Smith, R.W. Dean, Polymer Testing, 32, 1306–1312 (2013)
  31. K.M. Ashtankar, A.M. Kuthe, & B.S. Rathour, ASME International Mechanical Engineering Congress and Exposition, 56406, V011T06A017 (2013)
  32. A.O. Stephen, K.W. Dalgarno, and J. Munguia, Proceedings of the 6th International Conference on Advanced Research in Virtual and Rapid Prototyping, 31-35 (2013)
  33. B.M. Tymrak, M. Kreiger, & J.M. Pearce, Materials & Design, 58, 242-246 (2014)
  34. I. Durgun, & R. Ertan, Rapid Prototyping Journal (2014)
  35. O.S. Carneiro, A.F. Silva, & R. Gomes, Materials & Design, 83, 768-776 (2015)
  36. S. Ziemian, M. Okwara, and C.W. Ziemian, Rapid Prototyping Journal (2015)
  37. A. Lanzoni, M. Grasso, G. Staiano, and M. Martorelli, Rapid Prototyping Journal, 21(5), 604-617 (2015)
  38. F. Knoop, & V. Schoeppner, International Solid Freeform Fabrication Symposium, (2015)
  39. A.R. Torrado, D.A. Roberson, Journal of Failure Analysis and Prevention, 16(1), 154-164 (2016)
  40. K. Szykiedans, W. Credo, Procedia Engineering, 136, 257 – 262 (2016)
  41. N.G. Tanikella, B. Wittbrodt, J.M. Pearce, Additive Manufacturing, 17, 40-47 (2017)
  42. J.M. Chacon, M.A. Caminero, E. Garcıa-Plaza, P.J. Nunez, Materials & Design, 124, 143-157 (2017)
  43. J. Djokikj, O. Tuteski, E. Doncheva, & B. Hadjieva, Procedia Structural Integrity, 41, 670-679 (2022)

Article full text

Download PDF