Machines. Technologies. Materials.
Vol. 18 (2024), Issue 3, pg(s) 88-90

TECHNOLOGIES

Additive technologies applying in the design, development and filtering materials manufacturing

  • 1 NAS of Belarus
  • 2 State Scientific Institution “O.V. Roman Powder Metallurgy Institute

Abstract

On the filter for fine air purification example the possibilities of additive technologies are shown, which allow to simplify and facilitate significantly the product development process, in particular, the filtering purpose. The results of 3-D modeling of the filter design, as well as 3-D modeling and 3-D printing of the tooling for studying the properties of filter elements to the filter and their structural elements (except for the filter layer) are given. The possibility of questions operative solution in case of adjustment necessity of tooling designs and filter elements at additive technologies application is noted.

Keywords

References

  1. V.A. Valetov Additive technologies (state and prospects): textbook. (Sankt-Petersburg: ITMO University, Russia, 2015).
  2. A.G. Apostolov Review of the application of additive technologies in research in the field of chemistry and chemical engineering. J. Uspekhi v chemii i khimicheskoy tekhnologii. XXXIV. 6. (2020). Russia.
  3. M.A. Zlenko, M.V. Nagaitsev, V.M. Dovbysh. Additive technologies in mechanical engineering. (Manual for Engineers. Moscow. State Research Center of the Russian Federation FSUE “NAMI”, 2015). Russia.
  4. A.E. Volkhonsky, K.V. Dudkov Methods of manufacturing of prototypes and parts of units of various products of industry with the help of additive technologies. J. Educational technologies, 1 (2014). 127-143. Russia.
  5. N.K. Tolochko, S.O. Nukeshev, N.N. Romaniuk, S.I. Mendalieva. Additive technologies in production and machines repair: textbook (Nur-Sultan: S.Seifullin Kazakh AgroTechnical university, 2022).
  6. I.V. Gorbatov, A.A. Pilshchikov, Y.A. Orlov, V.A. Antyufeev, S.A. Antyufeev, N.Y. Orlova, D.Y. Karpov Determination of the possibility of creating mesh structures when manufacturing them using additive technologies, J. Vestnik VKO Concern: Almaz- Antey. 2. (2020), 74-82. Russia.
  7. A. Ilyushchanka, I. Charniak, A. Kusin, V. Kaptsevich, R. Kusin, N. Rutkovskaya, D. Shamal. The application of rapid-prototyping in the studing of samples of filtering materials based on woven nets, Int. J. Machines. Technologies. Materials. Year XV, Iss. 7. (2021). Bulgaria.
  8. V.B. Demyanovsky, D.A. Kaushansky, A.S. Drozd. Study of additive technologies possibilities based on thermoplastic materials in laboratory experiment and in the study of sand removal limitation in producing wells. J.Actual problems of oil and gas, Year 43 Iss. 4 (2023) 106-114. Russia.
  9. I.V. Abramov, Problems and prospects of industrial enterprises digitalization using additive technologies. J. Bulletin of Eurasian Science. 15 2 (2023). https://esj.today/PDF/69ECVN223.pdf.
  10. Barenblatt, G.I., Yentov V.M., Ryzhik V.M. Liquids and gases in natural strata movement (Moscow, Nedra, 1984). Russia.

Article full text

Download PDF