Machines. Technologies. Materials.
Vol. 18 (2024), Issue 9, pg(s) 282-285

MACHINES

Dynamic analysis of vehicles hydraulic lift for the case of load handling

  • 1 Faculty of Mechanical Engineering – University of Prishtina “Hasan Prishtina”, Kosovo

Abstract

The paper examines the dynamic analysis of a hydraulic lift that is used for lifting and lowering vehicles. These lifts are implemented in various servicing facilities for the repair of vehicles. The lifts consist of various mechanical and hydraulic parts and besides lifting and lowering the vehicle, they need to keep the vehicle lifted for a certain amount of time. During the work operations, the lift’s main parts are heavily loaded. The method of analysis consists of 3D modeling of the Hydraulic lift and carrying simulations with software. This enables to analyze the dynamics of motion, identify the forces and stresses in lift parts and the form and intensity of oscillations that can cause failures of parts and concerns about the safety. Conclusions from this paper will be useful regarding the loading dynamics on the Hydraulic Lift during lifting and lowering, and design considerations. Results will be shown in graphical form, in time dependence. The Hydraulic Lift is modeled based on the Data from the standard manufacturer. The software that will be used for modelling and analysis is SimWise 4D.

Keywords

References

  1. Lift manual, Type EE-6254: https://nordiclift.no/Images/uploaded/Brukermanualer2/EE- 6253,6254.pdf
  2. EN Standards of elevators with platform: prEN 16719 ; EN 280:2013 (WI=00098021); EN 280:2013/prA1
  3. SimWise 4D, Design Simulation, Technologies, https://www.design-simulation.com/SimWise4D/.
  4. Yekinni A.A, Olaiya K.A, Badiru A.N, Omogoye O.S, Design and Development of Motorised Vehicle Lifter, Journal Science and Engineering Perspectives, Sep Vol. 13, 2018.
  5. Afrim Sallahu, Shqyrtimi dinamik i liftit elektro-hidraulik për ngritjen e automjeteve, Master Diploma Work, University of Prishtina, Faculty of Mechanical Engineering, Prishtina, 2016.
  6. S. Saravanan, R. Rajiev, K. Sunil Kumar, An experimental investigation of car lifting mechanism using universal object interaction, Gradiva Review Journal, volume 8 ISSUE 10 2022, ISSN NO : 0363-805.
  7. M. Čuchor, L. Kučera, M. Lukáč, Design of Vehicle Lifting Equipment Using Progressive Methods, LOGI – Scientific Journal on Transport and Logistics, Vol. 12 No. 1 2021. DOI: 10.2478/logi-2021-0022.
  8. Sh. K. Amedorme, Design and analysis of modified four-post lift for light-duty vehicles, Journal of Mechanical Engineering and Technology (JMET) Volume 7, Issue 1, Jan-Dec 2023.
  9. M.Y.H. Bangash and T. Bangash, Lifts, Elevators, Escalators and Moving Walkways/Travelators, 2007.
  10. Dresig, Hans, Shwingungen mechanischer Antriebssysteme, Modellbildung, berechnung, analyse, synthese, Springer Verlag, Berlin, 2001.
  11. Ilir Doçi, Mirlind Bruqi, Nexhat Qehaja, Dynamic analysis and motion control of hydraulic crane for men lifting using modeling and simulations, Proceedings of the 27th DAAAM International Symposium, ISSN 1726-9679
  12. Ilir Doçi, Influentia of the stoppage - brakeing system of elevator in the elevator’s studs (rails) for the case of failure, TMT 2006.
  13. Yan Chen and Dr. Weidong Zhu, Dynamics and Control of Elevator Systems, Dynamic Systems and Vibrations Laboratory, University of Maryland Baltimore, 2007.
  14. Ilir Doçi, Siguria e Mjeteve Transportuese I (Safety of transportation Devices I), Book Chapter IX, Faculty of Mechanical Engineering, Prishtina, 2012.

Article full text

Download PDF