Trans Motauto World
Vol. 5 (2020), Issue 3, pg(s) 79-82

TRANSPORT TECHNICS. INVESTIGATION OF ELEMENTS. RELIABILITY

Adhesive technology in the automotive industry

  • 1 Faculty of Mechanical Engineering, Technical university of Kosice, Slovakia

Abstract

The paper presents the results of the research focused on the determination of the quality of adhesive joints of cold rolled sheets in the automotive industry. DC05 galvanized sheet was used for joints. A progressive type of adhesive used in the automotive industry was chosen. The shear and peel strength of the adhesive joints according to Winter were determined. The strength of the joints was determined depending on the cure temperature of the adhesive. After tests, the character of fracture surfaces of adhesive joints was evaluated.

Keywords

References

  1. Unsere Geschichte, unsere Zukunft [online]. [cit. 2013-02-03]. Available on the Internet: <http://www.tesa.de/industry/automobilindustrie/ueber_uns/uns ere_geschichte_unsere_zukunft>
  2. What is tesa ACX [online]. [cit. 2013-02-03]. Available on the Internet: <http://www.tesa-acxplus.com/eng/eigenschaften/technoloy>
  3. Stress Dissipation [online]. [cit. 2013-02-03]. Available on the Internet: <http://www.tesa-acxplus.com/eng/eigenschaften/stress_dissipation>
  4. Speiegelherstellung [online]. [cit. 2013-02-10]. Available on the Internet: <http://www.tesa.de/industry/automobilindustrie/exterieur/spieg elherstellung>
  5. What is tesa ACX [online]. [cit. 2013-03-01]. Available on the Internet: <http://www.tesa-acxplus.com/eng/eigenschaften/technoloy>
  6. THYSSENKRUPP STEEL EUROPE.: Forming made easy. Available on the Internet: <http://www.thyssenkrupp-steel-europe.com/tiny/3cR/download.pdf>
  7. A. KAYA:.Effects of various parameters on dynamic charakteristics in adhesively bonded joints, Materials Letters 58 (2004) 3451–3456.
  8. F. TAHERY: Influence of adherend´s delamination on the response of single lap and socket tubular adhesively bonded joints subjected to torsion, Composite Structures 93 (2011) 1765–1774.
  9. D. CASTAGNETTI: Failure analysis of bonded T - peel joints: Efficient modeling by standard finite elements with experimental validation, International Journal of Adhesion & Adhesives 30 (2010) 306–312.
  10. Itw Plexus - Structural Adhesives [online]. [cit. 2007-05-08] Available on the Internet: <http://www.itwplexus.co.uk/es/products/guidebond.html>
  11. The influence of nanoadhesives…[online]. [cit.2008-8-3]. Available on the Internet:
  12. EF. Karachalios: .Single lap joints loaded in tension with high strength steel adherends.IntJ Adhes Adhes 2013;43:81–95.

Article full text

Download PDF