Machines. Technologies. Materials.
Vol. 15 (2021), Issue 7, pg(s) 267-270

TECHNOLOGIES

Testing of technology for joining materials in the automotive industry

  • 1 Technical University in Košice, Slovakia

Abstract

Research on composite materials is nowadays developed on a global scale, because they have multipurpose applications. Composite materials are used in a wide range of industries. The most significant advantages of composite materials include st rength, stiffness, low fibre density (e.g. carbon fibre or glass fibre), the ability to make them into any shape required for the application. The paper deals with the possibilities of joining composite materials with metallic materials. The experimental part includes tests of the strength of the chosen type of adhesive and comparison of the individual results obtained by the experiment.

Keywords

References

  1. B.D. Agarwal, J.B. Lawrence. Fiber composites. Prague: SNTL- Nakladatelství technické literatury, 294 p. (1987)
  2. R. Bareš. Composite materials. Praha: SNTL, 325 p. (1988)
  3. M.D. Banea, M. Rosioara, R.J.C. Carbas, L.F.M. da Silva. Multi-material adhesive joints for automotive industry. Composites Part B: Engineering. Volume 151, 15 October. Pages 71-77 (2018)
  4. J. Jančář. Introduction to materials engineering of polymer composites. Brno: Brno University of Technology, Faculty of Chemistry, 193 p. ISBN 8021424435 (2003)
  5. P. Skočovský et al. Material science for mechanical engineering. Žilina: University of Žilina in Žilina, 349p. ISBN 8080705933 (2006)
  6. STN EN 1465: 2006, Adhesives. Determination of the shear strength of a lap joint under tensile stress. (2006)
  7. M. Gregor. Technologie a technika lepení. Lepidla.cz, Available at: https://www.lepidla.cz/cs/a/technologie-a-technika-lepeni--zakladni-informace.html (2021)
  8. A. Rivai, K. Diharjo, M. Anwar, R. Tarigan. Effect of Adhesive Thickness and Surface Treatment to Shear Strength on Single Lap Joint AL/CFRP Using Adhesive of Epoxy/Al-fine-powder, Conference: 6th Nanoscience and Nanotechnology Symposium (NNS2015) 1710. 10.1063/1.4941496. (2015)
  9. M. Balážiková, M. Tomašková. Objectification and determination of hand-armd vibrations, In: Trans&Motauto World. - Sofia (Bulharsko): Scientific Technical Union of Mechanical Engineering 4/3, p. 87-90. ISSN 2367-8399 (2019)
  10. A. Rick. Understanding Adhesive Failures. Available at : https://tombrowninc.com/blog/understanding-adhesive-failures/ (2018)

Article full text

Download PDF